86 TurboZ C/S Project

[banger68]

After a couple years of not sure where I'll be working next, I decided not to wait any longer and restore the exterior of the Daytona.

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310009_large.jpg

Here are few pic over the past couple weeks.

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310020_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310019_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310018_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310017_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310016_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310015_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310028_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310027_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310026_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310025_large.jpg

[banger68]

The car in primer getting wet sanded

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310023_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310022_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310021_large.jpg

[banger68]

It got a bit of colour today. Got the rims back from the refinisher.

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310011_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310014_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310013_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310012_large.jpg

I'm very pleased with how they turned out.

[CoolV300C]

Awesome job on the rims. This may be the best color combo ever for this car. Keep this thread updated with progress pics - would love to see the final product!

[CSX153]

awesome, keep us updated

[banger68]

I took a little bit of liberty with the colours. I darkened the gold a bit and I'm using a deeper black then the stock colour.

[CoolV300C]

The gold looks close to Fiberide gold. I'm sure it will look great. When will it be done?

[banger68]

Supposed to be done tomorrow to go to Moparfest this weekend. But they are behind a bit.

[clocktowersniper]

Wheels look fantastic!!

[banger68]

Thanks, they did a good job on them. Get some better rubber on them in the spring.

Car has been delayed until next week, so the Daytona is going to miss Moparfest.

Got my decals from LaserXT1986 yesterday ... they look great.

[CDNTurboZ]

Looks Awesome! Makes me want one again!

[Turbozcs2003]

It got a bit of colour today. Got the rims back from the refinisher.

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310011_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310014_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310013_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310012_large.jpg

I'm very pleased with how they turned out.

Who did the wheels and how much did it cost???

[JeremyL]

Who did the wheels and how much did it cost???

I'd like this info as well. :thumb:

[banger68]

Wheel Wizards in Hamilton Ontario. They were around $100 per rim.

[banger68]

Looks Awesome! Makes me want one again!

Told you that you would regret getting rid of it. ;)

[banger68]

The car is pretty straight now.

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310030_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310029_large.jpg

[JDAWG]

www.transwheel.com does good work, they might have some in stock you can exchange or they can redo yours for around the same price, if you guys dont want to pay shipping to canada

[JohnnyIroc]

wow awesome progress the car looks great!

[banger68]

There was a bit of a delay at the shop, but things are moving again.

The jambs have been base coated and a bit of surface rust in the hatch area has been cleaned up.

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310031_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310032_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310033_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310034_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310035_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310036_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310037_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310038_large.jpg

[banger68]

Car went into the booth this morning.

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310042_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310041_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310040_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310039_large.jpg

[raccoon]

oh nice nice nice.

[BadAssPerformance]

Nice work :thumb:

Do you have a pic of one of the wheels straight on by chance?

Moved to "exterior resto" section

[banger68]

Do you have a pic of one of the wheels straight on by chance?


I don't at the moment, but I can take a couple on Monday.

[JeremyL]

I don't at the moment, but I can take a couple on Monday.

I'd like a good pic or two as well. :thumb:

[banger68]

The car has been basecoated.

http://memimage.cardomain.com/ride_images/3/3481/4621/33702310051_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310050_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310049_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310048_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310047_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310045_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310044_large.jpg
http://memimage.cardomain.com/ride_images/3/3481/4621/33702310043_large.jpg

[banger68]

I'll take the pictures of the rims this afternoon that you guys wanted.

[banger68]

The car has been painted!!

http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/2_P1020595small.jpg
http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/2_P1020593small.jpg
http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/2_P1020592small.jpg
http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/4_P1020589small.jpg
http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/1_P1020596small.jpg

[banger68]

A pic straight on of the rim. Sorry, it's a little dirty from wet sanding the body still.

http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/2_P1020585small.jpg


The fascias and trim get painted tomorrow.

[fuzz's84Daytona]

Very nice! Always liked the black with gold.


Fuzz

[trbowgn]

Looks awsome and the rims looks sweet on there as well.
Are your Decals going to be gold too?

[banger68]

Are your Decals going to be gold too?

Yes. I got a set from LaserXT1986

[JohnnyIroc]

the car looks amazing good job:thumb:

[slasky]

wheels look fantastic!!

+10000

[CDNTurboZ]

Nice!!!

[Juggy]

lookin good bill :nod:

[Vigo]

Cant wait to see the finished product!

[banger68]

Cant wait to see the finished product!

Neither can I!! ;)

[banger68]

Well ... this hasn't been working out they way I wanted. The short story is I had to pull the car from the shop before it was done. I've got it mostly back together. It still needs a couple things, but it's looking decent.

http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/1_TurboZ_003small.jpg[/URL]
http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/1_TurboZ_002small.jpg[/URL]
http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/1_TurboZ_001small.jpg[/URL]
http://www.ontarioshelbydodge.com/forums/photoplog/images/20/large/1_TurboZ_004small.jpg[/URL]

[Sloride]

Cough --tint--- Cough -- Louvers-- cough :)

[J&H Ryan]

Dannng Bill! Looks great! Just need the gold pinstriping and a couple decals and that thing will be mint.

[Polygon]

Dannng Bill! Looks great! Just need the gold pinstriping and a couple decals and that thing will be mint.

Agreed!

That thing looks awesome man. I do agree that it needs some tint as well. :thumb:

[banger68]

Cough --tint--- Cough -- Louvers-- cough :)

Agreed ... tint would give it a better look. Louvers ... not sure that's my thing.

[Captain Chaos]

That car is amazing. Its still my favorite G body of all time. Nice job.

[89FerrariShelby]

Cough --tint--- Cough -- Louvers-- cough :)

X2

I've always wished my 'tona was the 4 eye version. I love those bodies.

AMAZING looking car. :hail:

[tommyturbo]

Well ... this hasn't been working out they way I wanted. The short story is I had to pull the car from the shop before it was done. I've got it mostly back together. It still needs a couple things, but it's looking decent.
How come yoou had to pull the car from the shop? were they doing something you didn't like?

[CoolV300C]

Looks awesome. I hope you have a space in the garage for that thing, and aren't going to leave it outside!

Congratulations, I'm sure you'll enjoy that car.

[1966 dart wagon]

wow the car looks amazing, its a great feeling when your car is all done being painted!:thumb: Love the wheels BTW

[JohnnyIroc]

looks amazing nice job:thumb:

[banger68]

Thanks for the kudos guys.

Let's just say the owners and manager were not seeing eye to eye.

[shelbymopar89]

Looks great, keep us posted.

[banger68]

With the new job and deaths in the family the Daytona has been taking a back seat for a bit. But I was able to get the stripe done. It's a little heavier then the stock stripe and a little darker like the paint on the wheels.

http://carphotos.cardomain.com/ride_images/3/3481/4621/33702310070_large.jpg

Try and get a better image later.

[BadAssPerformance]

Lookin sharp there Banger! :thumb:

[omni_840]

looks good, definately post some more pics:)

[banger68]

looks good, definately post some more pics:)

I'll try add some when the light is better. Here is a link to the painting process.

http://www.turbo-mopar.com/forums/showthread.php?t=41157

[badandy]

DROOL!:eyebrows:

One of my favorite TD's ever :nod:

[trbowgn]

Looking Good
Glad to hear you are finding some time for the car.

[banger68]

Got my new decals for the Daytona today.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030519.jpg

I did them in a slightly darker gold to match the rims and belt stripe. I'm liking the changes from stock. Now I have to figure out how to get the fender "CS: emblems and the tail light lettering to match.

As a side note I have a stock set of these for sale in the OEM gold if somebody needs them.

[GLHS069]

let's see some pictures of the whole car!

[banger68]

Some at the recent show.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/Moparfest.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/Moparfest2.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/Moparfest3.jpg

[vntned]

Nice! Im liking the darker gold! What color is it vs the stock gold? And do you know what color the stock gold is?

[minigts]

Car looks great! I think you did a write up on this a while back when you painted it? Just a wonderfully done paint job. Also nice to see at least one L-body in the mix. :D

[banger68]

Nice! Im liking the darker gold! What color is it vs the stock gold? And do you know what color the stock gold is?

The colour I used is 09 Toyota gold. The 3M bronze is what I used for the stripe and decal. They match pretty close to perfect. Not sure the code for the stock gold but it is much lighter.

---------- Post added at 08:19 PM ---------- Previous post was at 08:14 PM ----------


Car looks great! I think you did a write up on this a while back when you painted it? Just a wonderfully done paint job. Also nice to see at least one L-body in the mix. :D

Thanks, yeah I did a quick write up when it was painted. Problem is the paint on the front fascis cracked while sitting in the garage this winter. Have to get it redone this winter ... hopefully properly this time ... and it matches.

There were a couple other L-bodies scattered around the show.

[J&H Ryan]

Love it - did a local shop do the decals or did david do another Z owner a solid?

[banger68]

Local shop. They have the graphic on file now so they can do them in any colour that 3M has.

[30 PSI SHADOW]

dont forget to use flex agent in the paint... it IS SMC plastic.

---------- Post added at 10:33 AM ---------- Previous post was at 10:32 AM ----------

OH and i love that car. I Miss my 86 CS so much

[banger68]

dont forget to use flex agent in the paint... it IS SMC plastic.

---------- Post added at 10:33 AM ---------- Previous post was at 10:32 AM ----------

OH and i love that car. I Miss my 86 CS so much

They told me that they did use the flex agent! That's what ticks me off.

[J&H Ryan]

I thought it was urethane, but in any case, its not the flex agent that is causing the paint to chip. Its crappy paint or blended to be too brittle. Chances are the bumper will crack before non-flex agent paint does. OR bad paint will CAUSE the bumper to crack. Paint is weird stuff. It becomes one with the substrate. Or in your case, not.

(former OEM paint dude)

[banger68]

Well this cracked just from the cold. It didn't get bumped. The back bumper is fine so I presume they were not sprayed at the same time. They were both off the car when painted.

[banger68]

Finally got off my arse and get some long overdue work on the Daytona. I stripped out the engine bay to get it cleaned up.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030569small.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030571small.jpg

I was going to put in a T2 but the short block looks really good still. Think I'll leave it in until the 2.4 swap is ready.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030570small.jpg

[banger68]

Got my valve cover cover and intake back.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030587small.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030589small.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030588small.jpg


My hand is healing good so hopefully I can sand the engine compartment and paint it soon. Want it back together!

[BadAssPerformance]

Looking good!

Threads merged :thumb:

[banger68]

Looks like I found why I was getting a puff of oil smoke on start up and acceleration.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030591small.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030592small.jpg

Valve seal I presume.

[J&H Ryan]

Nice!

[big_ang]

Who did the valve cover cover and intake?
They look really good, I'd like to get mine done too.

[banger68]

TPC Custom Coating
http://london.kijiji.ca/c-services-painters-painting-Powder-Coating-W0QQAdIdZ131539182

Tom is good to deal with. Tell him I sent you ... I have more parts to get done. ;)

[banger68]

Just got some powder coating done and I changed my mind and I'm going straight to 2.4. Picked this up today.
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030638.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030636.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030642.jpg

Not sure if that intake is going to work without some cutting.

Also got a little bonus with the deal.
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030640.jpg
http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030639.jpg

[banger68]

Been awhile since I have worked on the Daytona. With work, priorities in the house, and losing my Mom early this year the car has taken a back seat ... again. Pulled it out today to give it a quick clean up. http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030920_zpsbecf0009.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/P1030920_zpsbecf0009.jpg.html)http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030923_zps3a985607.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/P1030923_zps3a985607.jpg.html)

- - - Updated - - -

Pulling out a bunch of my 8 valve parts and get her running again. Put the 2.4 on the back burner for a bit.http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030926_zpsa62e9b19.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/P1030926_zpsa62e9b19.jpg.html)http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030925_zps5e024635.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/P1030925_zps5e024635.jpg.html)http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/P1030924_zpsbabf954a.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/P1030924_zpsbabf954a.jpg.html)

[banger68]

Cleaned up the rims before I pack them away. Have to remember to ask the shop what they used on the bare aluminum.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0363_zps1a3171e4-1.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0363_zps1a3171e4-1.jpg.html)

[glhs875]

Nice Looking Car!! I love a first generation Daytona!!

[banger68]

Tnx, just need to get my arse in gear and have it driving again next spring. I keep flip flopping between the 8V 2.2 and the 2.4.

[banger68]

Got it pulled apart today. Put a friggen dent in the fender. It's only the size of the tip of a pen ... but I know it's there. Man was I pissed. But finally getting something done.http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0366_zps36e3588d.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0366_zps36e3588d.jpg.html) http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0367_zps687fa47c.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0367_zps687fa47c.jpg.html) http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0370_zps60de2098.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0370_zps60de2098.jpg.html)

[daytona93rtblue]

I love this car, seriously, wish I can find one.


Its a beaut congratulations.

Rims are amazing

[banger68]

Sizing up the engine and trans mounts. Got these from spoolinhard and think we will make a couple more mods and fit it in the car.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG-20131103-00158_zps9dc3fa96.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG-20131103-00158_zps9dc3fa96.jpg.html)

[banger68]

Got a couple more parts to add. Just need a warm garage.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0382_zps1c35cf2f.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0382_zps1c35cf2f.jpg.html)

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0384_zpsc06fc837.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0384_zpsc06fc837.jpg.html)

[banger68]

More parts to the pile.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0386_zpsdde2dff4.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0386_zpsdde2dff4.jpg.html)

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0387_zpsd1e30dcf.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0387_zpsd1e30dcf.jpg.html)

Hopefully it will be warmer in a couple weeks so I can start reassembly.

[woodrowz]

More parts to the pile.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0386_zpsdde2dff4.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0386_zpsdde2dff4.jpg.html)

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG_0387_zpsd1e30dcf.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG_0387_zpsd1e30dcf.jpg.html)

Hopefully it will be warmer in a couple weeks so I can start reassembly.


OH my, Thats what I need for my Z. Where did you find these? And how much may I ask?

[banger68]

http://www.turbo-mopar.com/forums/showthread.php?53473-Official-BC-Coilover-Kit-Development-Interest

http://rbryant.freeshell.org/bc_coilovers.htm

[banger68]

Got the rest of my parts from Rich today.

http://i1006.photobucket.com/albums/af190/bkstbrown/86%20TurboZ/IMG-20140417-00276_zps69d40f13.jpg (http://s1006.photobucket.com/user/bkstbrown/media/86%20TurboZ/IMG-20140417-00276_zps69d40f13.jpg.html)

Just need to paint the engine bay the can start assembly. Decided the hold off on the 2.4 and put it in my old 89 Shelby to tinker with. Going to drop in the 89 T2 for now instead.

[banger68]

https://i.imgur.com/HILSKad.jpg

Found the old thread. Can't believe this has been sitting this long.

[Trevor404]

I logged in today to resurrect my 4 year old project thread, so I was happy to see this one too. We're keeping the cars alive, that's what matters.
Great build so far, are you starting to work on it again?

[banger68]

Yes, I am. Progress is slow ... but there is progress.

https://i.imgur.com/6U2N0Jc.jpg

Getting it up and running with 89 front brakes and k-frame for now. Have too many ideas

[banger68]

https://i.imgur.com/nhCHgfK.jpg

Things are rusty from sitting so chased all the threads in the K-Frame before I break something.