Parts I'm Still Looking For

[Polygon]

I'm in need of a few parts to finish off the interior of my GTC. The parts need to be gray. So they need to come off a LeBaron j-body (87-89).

Steering wheel (leather wrapped, and an airbag wheel) and in mint condition would be nice. I might consider a second gen wheel as well.
A-pillar trim, no broken tabs.
Latches for the rear seats.
All the carpet trim for the center console.

That's all I can think of right now. Let me know if you have any of these.

[Polygon]

BUMP!

I also need the carpet for the center console.

[Polygon]

Bump.

Still need these.

[supercrackerbox]

Is that A-pillar trim different between LeBarons and Daytonas?

[Polygon]

It could be as most of the stuff in the front was the same. Id you could get me some pictures of one, I'd be able to tell.

[supercrackerbox]

Let me see if I still have them, but I'm pretty sure I do.

Need any consoles or anything else before I throw them away? I've got I think 3 five-speed and one automatic console that I can't seem to sell.:eyebrows:

[mopar-tech]

[QUOTE=Polygon;534676]I
Steering wheel (leather wrapped) and in mint condition would be nice. I might consider a second gen wheel as well.
QUOTE]

I have both an '89 Shelby Daytona wheel and a '91 Spirit R/T wheel

I'll have to double check on the Daytona wheel, it should be stored in the barn from when I stripped the car.

[2.216VTurbo]

[QUOTE=Polygon;534676]I
Steering wheel (leather wrapped) and in mint condition would be nice. I might consider a second gen wheel as well.
QUOTE]

I have both an '89 Shelby Daytona wheel and a '91 Spirit R/T wheel

I'll have to double check on the Daytona wheel, it should be stored in the barn from when I stripped the car.


Any mint TC Masi steering wheels while you are at it Mr D?:eyebrows: As long as you were going up to the barn anyway;) Ginger with airbag (90-91)

[mopar-tech]

Nothing for TC I'm afraid.

[Polygon]

Let me see if I still have them, but I'm pretty sure I do.

Need any consoles or anything else before I throw them away? I've got I think 3 five-speed and one automatic console that I can't seem to sell.:eyebrows:

Nah, I've got a couple myself, but oddly enough no carpet that goes around them. Would you be willing to part with that as well?


I have both an '89 Shelby Daytona wheel and a '91 Spirit R/T wheel

I'll have to double check on the Daytona wheel, it should be stored in the barn from when I stripped the car.

If it's in mint that would be awesome. You wouldn't mind snapping a pic of it when you find it would you?

[supercrackerbox]

I can check on the carpet pieces. Most of the ones I have, the carpet has fallen off the cardboard backing, but could be re-glued with some spray adhesive. I'll dig through the garage tomorrow night after work and see what I can find for ya.

Does your car have the standard seat belts, or the ones that latch in the door? Don't know if the LeBarons had that option, but with Daytonas at least, it does make a difference in the console and trim pieces.

[Polygon]

Yeah, it does. Some LeBarons did have those belts, but mine is the standard three point.

[banger68]

I have the steering wheel and A-pillar trim from a 87 Lebaron coupe. The trim is vinyl wrapped, not bare plastic like a Daytona.

[Polygon]

I have the steering wheel and A-pillar trim from a 87 Lebaron coupe. The trim is vinyl wrapped, not bare plastic like a Daytona.

Di you have any pictures by chance, or could you take some?

[banger68]

I'll dig them out and take some pics for you.

[Polygon]

Sweet, thanks!

[banger68]

I haven't forgot, just haven't found them yet. I'm in the storage loft tomorrow.

[mopar-tech]

Pics attached- No major nicks or gouges but they need a re-dye if looking for something "perfect"

[banger68]

http://memimage.cardomain.com/ride_images/3/2204/4601/30509800010_large.jpg
http://memimage.cardomain.com/ride_images/3/2204/4601/30509800011_large.jpg
http://memimage.cardomain.com/ride_images/3/2204/4601/30509800009_large.jpg

[supercrackerbox]

Yep, those are different than the Daytona pieces.

[Polygon]

Pics attached- No major nicks or gouges but they need a re-dye if looking for something "perfect"

The only person so far with an airbag wheel, but it's in worse condition than what I've got. :(


http://memimage.cardomain.com/ride_images/3/2204/4601/30509800010_large.jpg
http://memimage.cardomain.com/ride_images/3/2204/4601/30509800011_large.jpg
http://memimage.cardomain.com/ride_images/3/2204/4601/30509800009_large.jpg

The a-pillars are great, and I assume all the tabs are there? But I need the airbag wheel. How much do you want for the a-pillars shipped to 84004?

[mopar-tech]

The only person so far with an airbag wheel, but it's in worse condition than what I've got. :(


Sorry about that!

[Polygon]

Sorry about that!

Nah, no worries man. :)

[Polygon]

Bump.....

Back to square one. I still need all of these.

[Polygon]

Seems I'm stuck at square one. :(

Someone has to have some of these.

[86seeS]

i think i have everything u need will 88 lebaron turbo convert fit? car only has 60,000 miles interior was very nice and gray! air bag wheel too... pm me