View Full Version : GLHS hood vent block-off plate
85shelbycharger
05-04-2006, 10:51 PM
Well I"m going to be upgrading my Charger to T2 status here very shortly and the motor has the 2 piece intake, so I need to get my hands on one of those GLHS style hoodvent block-off plates. I don't know how else to descibe it...but on a regular Shelby Charger hood, under the vent, you have the tray that drops down on an angle, but on a GLHS they just put a plate that sat flush instead of going down on the angle so it would clear the 2 piece. If anyone has one, let me know. Thanks.
http://www.turbo-mopar.com/forums/showthread.php?t=2928
85shelbycharger
05-05-2006, 12:41 PM
http://www.turbo-mopar.com/forums/showthread.php?t=2928
Sweeet, thanks for the link :thumb:
OMNI-Potent
05-09-2006, 09:55 PM
Hey Pat,
You can email us at omni1985@aol.com if you have any questions. I have additional pics if you need more.
The link is attached above, thanks grim!
Thanks!
85shelbycharger
05-09-2006, 10:12 PM
Hey Pat,
You can email us at omni1985@aol.com if you have any questions. I have additional pics if you need more.
The link is attached above, thanks grim!
Thanks!
I'll be ordering one here shortly :thumb:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.