GLHS hood vent block-off plate

[85shelbycharger]

Well I"m going to be upgrading my Charger to T2 status here very shortly and the motor has the 2 piece intake, so I need to get my hands on one of those GLHS style hoodvent block-off plates. I don't know how else to descibe it...but on a regular Shelby Charger hood, under the vent, you have the tray that drops down on an angle, but on a GLHS they just put a plate that sat flush instead of going down on the angle so it would clear the 2 piece. If anyone has one, let me know. Thanks.

[grim]

http://www.turbo-mopar.com/forums/showthread.php?t=2928

[85shelbycharger]

http://www.turbo-mopar.com/forums/showthread.php?t=2928

Sweeet, thanks for the link :thumb:

[grim]

no problem

[OMNI-Potent]

Hey Pat,

You can email us at omni1985@aol.com if you have any questions. I have additional pics if you need more.

The link is attached above, thanks grim!

Thanks!

[grim]

no prob

[85shelbycharger]

Hey Pat,

You can email us at omni1985@aol.com if you have any questions. I have additional pics if you need more.

The link is attached above, thanks grim!

Thanks!

I'll be ordering one here shortly :thumb: