PDA

View Full Version : Will it work?



rare_ram
07-28-2009, 10:54 PM
Swapping in a 2.5 T1 into a caravan that originally had a 3.0. Will the fuel pump be up to the task or will I have to replace it?

thefitisgay
07-28-2009, 10:56 PM
turbo and v6 are the same pump as ;long as it has the sticker i guess

A.J.
07-28-2009, 11:46 PM
I did the same swap in my '88 van. V-6 fuel pumps are the same as the turbo pumps as stated. I ran mine for about three years until it started giving me problems. Then I replaced it with a Walbro from Turbos Unleashed.

A.J.

turbovanmanČ
07-29-2009, 01:59 AM
Swapping in a 2.5 T1 into a caravan that originally had a 3.0. Will the fuel pump be up to the task or will I have to replace it?

What year van?

If 90 and older, its basically a bolt in but you have to use the turbo trans, mount brackets, accessory brackets, wiriing harness and computer.

If 2nd Gen, you'll need a custom wiring harness but the above applies.

rare_ram
07-29-2009, 07:41 AM
87. Engine from a 90 Shelby Daytona.

turbovanmanČ
08-02-2009, 03:46 AM
87. Engine from a 90 Shelby Daytona.

Your golden, :nod:

If you use an 89 harness, then you'll need to find a new fuel injection harness as the 90 is a SBEC and its sequential instead of batch fired in 89.