PDA

View Full Version : For Sale: 87 GLHS charger 924


amoparacer
07-03-2009, 11:26 AM
This car is modified alot. Body is stock needs paint and repair one small dent in rear quarter. Turbo is new GT30DBB from Turbos unleshed 91 Common block TII rods with ARP wav locks rebushed. Top and bottom has ARP studs. Forged pistons one bad as 60 psi other 3 have 120 does still run good oil presssure. FM billet fuel rail with braided lines and pressure guage. Have a new set of Venolias and rings to go with car. Tranny is hybred 568 with 3.50 diff Quaiff built by Forward motion. Axels are large spirit CVs with pontiac axels. 3 bar map 83 lbs injectors Comp is sockted and using Blue berry cal. Has Wide band with data logging Dyno jet. TU exaust stainless 3 inch swing 3 inch to flow master side exit I have 3 cams S2 , S2+ , S3+ the S3+ is in the car. After installing the S3+ I ran it lean heans the one hole with 60 psi. Comes with stock wheel with nice new tires and Kosi race wheel for the slicks and craiger ultra light with skines for the rear. Before new cam car ran 7.8 at 90 mph on the 1/8 mile Interior is in good shape needs carpet. All shelby stuff is on the car $5000 I have 11000 in the car. Going out of the country need to sell. I may part the car out if I dont find a buyer quickly

Lynn Anaheim California 310-251-2100
amoparacer
07-04-2009, 10:31 AM
hey this car has all the good stuff
Force Fed Mopar
07-04-2009, 11:38 AM
hey this car has all the good stuff

But no pics apparently :confused:
amoparacer
07-06-2009, 10:28 AM
I will take some today I though there was no interest:confused:
l8back
07-06-2009, 06:46 PM
hey interested email pictures to l8back2003@yahoo.com
i'm in the pasadena area closed to u!
rosie
07-06-2009, 06:57 PM
Why didn't you come to the meeting with it in tow?
amoparacer
07-10-2009, 04:20 PM
Sorry I have been packing to move and selling my buisness. Rosy what would you charge me to install the pistons in the car for me.
BadAssPerformance
07-10-2009, 04:43 PM
+1 for pics...
2.216VTurbo
07-11-2009, 02:28 AM
Sorry I have been packing to move and selling my buisness. Rosy what would you charge me to install the pistons in the car for me.

Be an easier sell as a running car Lynn:thumb:
amoparacer
07-11-2009, 10:12 AM
I dont have time to change the pistons who do you have that needs the work Al
2.216VTurbo
07-11-2009, 12:28 PM
butchsuppe on here will handle it for you... Send him a PM
rosie
07-11-2009, 05:21 PM
I appreciete the work but I keep it regional so no one gets mad at me. If the guys up there say "no" get back to me.