My homebuilt 3" swingvalve (Now with Pics)

[guyd_15]

Pics are now loaded.
Guy

[guyd_15]

OK, I got the pictures loaded. LMK what you think. I'm pretty proud, this ranks right at the top for personal butchery.
http://www.turbo-mopar.com/forums/photopost/showgallery.php?cat=500&ppuser=87
Guy

[cordes]

Not bad at all. That bad boy should certianly flow much, much more than the 2.5"

[guyd_15]

I put a DIY build up on the "other site"

http://www.turbododge.com/forums/showthread.php?t=115700

Guy

[shelbyplaya]

wanna make me one of them for my TBI headder?

[guyd_15]

I'd be willing to try :thumb:. Seems like it adds some variables. A question comes to mind, how much does your TBI header effect the placement of your turbo? If I throw a TBI header together (so I can have a mock up to work with), will that put me close enough to simulate your set up to eliminate problems with the downpipe and exhaust lining up? I ask this because I have seen several TBI headers (all home built) and all the turbo mounting flanges have varied by a couple of degrees and this in turn effects the mounting of the exhaust. I would use a header flange to mount the downpipe, the use of a braided flex joint may be enough to take care of alignment issues. Or I could just tack the header flange in place, this would alllow you to check the alignment and modify it if needed.
Guy

[guyd_15]

Oh wait just one minute!!! I just saw your 7 day wonder project, there's no way you'll even have a chance to view this message!!! LOL
Guy

[Tony Hanna]

Looks sharp.:thumb: