Charge air temp sensor wiring?

[todd900ss]

I have a 86 glht that was converted to t2. The charge air sensor is open & needs replaced. But I do not know if the wiring is right, what terminal on the sensor is the 5 volt signal (on the 86 glht this wire is black with red) & what terminal is the signal ground ( this wire is black with light blue)?

Thanks in advance,
Todd

[turbovanman²]

http://www.turbo-mopar.com/forums/showthread.php?t=3220&highlight=sensor+wiring

[todd900ss]

The info I have states the pin numbers are 25, but thats not what I need to know. What terminals at the sensor are the 5 volt ref & the ground? It may not mater depending on the type of sensor it is, but I don not know.

[turbovanman²]

The info I have states the pin numbers are 25, but thats not what I need to know. What terminals at the sensor are the 5 volt ref & the ground? It may not mater depending on the type of sensor it is, but I don not know.

The link provides the correct pin.

Not sure, I'll look at my CAT sensor tomorrow.

Yes, it matters, you have to use a CAT sensor.

[todd900ss]

Thanks tvanman, Let me know.
I think it would be the same on the coolant temp sensor. I will check & see what one is the 5v ref. at the conector.