Bilet fuel rail

[shrapnel]

Are these any different or better than the stock fuel rails?

[BIG PSI]

I bought one not to long ago from a Vendor in here. It is one nice looking piece, but the bracket that holds the FPR to the rail it to tall and the FPR will NOT seat into its hole. So make sure that if you buy one it fits.

Chuck

[BadAssPerformance]

Larger fuel rails are typically recommended at power levels above 300hp.

[GLHNSLHT2]

depends on your goals. My new intake required one because of where the plenum sits. I like having the an fittings on them, makes taking the fuel lines off a cake walk. If you're not going for more than 350hp it's probably not important that you have one.

[shrapnel]

Thanks for the info. I will stick with the original since I like to keep this mostly stock.

[Juggy]

I like having the an fittings on them, makes taking the fuel lines off a cake walk.

+1

never have to deal with chiiity ars rubber hose clamps AGAIN!