PDA

View Full Version : For Sale- New Wiseco Pistons $275. a set



Chris W
06-10-2009, 09:23 PM
Wiseco mis-machined a custom set of pistons and we are trying to help them sell them.

Specifications:

2.5
TIII 16-valve (Lotus)
.020 oversize
15cc dish SOLD!!!!!

Includes rings and .866 wrist pins

These are priced for a quick sale and there is only one set of 4 pistons. First come first serve......

Thanks!

Chris-TU

Mr overkill
06-10-2009, 09:50 PM
hey chris would i be able to use them in my 2.5 build ????

Chris W
06-10-2009, 11:50 PM
hey chris would i be able to use them in my 2.5 build ????

If your block will support the .020 over pistons and plan on running a 16-valve head with .866 pins.

Chris-TU

Mr overkill
06-11-2009, 06:15 AM
LOL it should work fine with a 8V ill just have 2 extra notches lolol whats the stock pin size on a stock t2 rod

Juggy
06-11-2009, 09:30 AM
0.901"

Mike_Shepard
06-11-2009, 10:36 AM
Dangit if only these were for an 8V

Turbo3Iroc
06-11-2009, 11:59 AM
Using a 16v Lotus head piston in an 8v application will yield a high compression ratio. These pistons have a lot less dish in them.

Chris W
06-11-2009, 01:13 PM
I just want to clarify what I mean by mis-machined. The customer requested 2.2 pistons and they accidentily machined them to 2.5 specs. There is nothing wrong with these pistons. Stock pin size is .900 but these are .866 so your rods would have to be rebushed to accept these pistons.

Thanks!

Chris-TU

turbovanmanČ
06-12-2009, 03:45 AM
I needed these over 2 years ago, :(

I would get them if my rods hadn't been oversized, wicked deal, :thumb:

mpgmike
06-12-2009, 05:48 PM
I'll take them.

Mike

mpgmike
06-16-2009, 07:04 AM
Hey, while you're at it, could I get a set of your TU rods, maybe even sized for the new pistons?

Mike

Chris W
06-16-2009, 02:24 PM
Hey, while you're at it, could I get a set of your TU rods, maybe even sized for the new pistons?

Mike

We are already working on them per our last phone call :thumb:

Chris-TU

mpgmike
06-16-2009, 02:28 PM
[Chris, that was a bump and a plug...sshhhhhhh]

crazymadbastard
06-16-2009, 07:25 PM
um Chris, can you have em make a stratus 2.4 .020-over by mistake for me? dig the price!

SoCalCSX
06-16-2009, 10:44 PM
um Chris, can you have em make a stratus 2.4 .020-over by mistake for me? dig the price!


Or 2.4 pistons with a t2 pin size would be the shyte

black86glhs
06-16-2009, 10:48 PM
I could use .010" over 2.2's also......LOL.

snoman
06-16-2009, 11:21 PM
so are these gone?
I was thinking some set up rods would make these fit my hybrid 16v.

any ideas?

Chris W
06-17-2009, 02:06 PM
so are these gone?
I was thinking some set up rods would make these fit my hybrid 16v.

any ideas?

SOLD in post # 10.

Chris-TU