PDA

View Full Version : Check out my 3" side exit...



turbomopar87
04-25-2006, 10:55 PM
Well after days of measuring and fabricating, i finally got everything welded up tonite. Check out the link for pics cuz i cant post attachments.

Its a 3" DP to a Magnaflow High-Flow Cat (thanks racing solutions) to a Dynomax race bullit. The system ends with a 2.25"x8" rectangle exhaust tip off a Z28 Camaro. The tip fits perfectly in front of the rear tire.

I am putting it on the car Wed, weather permitting. I will get pics of it installed ASAP.

http://www.cardomain.com/ride/2086441/7

cordes
04-25-2006, 11:08 PM
Looks pretty nice. The tip is a nice addition too.

85_600
04-26-2006, 01:15 AM
Make sure you post a video or sound clip of this when it's done.:thumb:

Keito
04-26-2006, 06:08 AM
Nice.
A vendor should sell these as kits.
I would buy one.

zshadow
04-26-2006, 07:45 AM
that looks damn good! i just put a 2.5" side exit on my car as well!


2.5" dp, cat delete, and glasspack :)
http://img87.imageshack.us/img87/232/resized56pf.jpg


the tip is reallllly dirty... normally chrome
http://img87.imageshack.us/img87/4161/resized65zo.jpg

~Kevin

Wink
04-26-2006, 11:13 AM
Well after days of measuring and fabricating, i finally got everything welded up tonite. Check out the link for pics cuz i cant post attachments.

Its a 3" DP to a Magnaflow High-Flow Cat (thanks racing solutions) to a Dynomax race bullit. The system ends with a 2.25"x8" rectangle exhaust tip off a Z28 Camaro. The tip fits perfectly in front of the rear tire.

I am putting it on the car Wed, weather permitting. I will get pics of it installed ASAP.

http://www.cardomain.com/ride/2086441/7



That really looks nice. You just can't beat it!!!!


By the way, if you right click on your cardomain pics and select properties, you can copy the link to the pic and post them using the advanced features.

http://memimage.cardomain.net/member_images/10/web/2086000-2086999/2086441_207.jpghttp://memimage.cardomain.net/member_images/10/web/2086000-2086999/2086441_210.jpg



I took the liberty of doing two for you. Sorry if I overstepped my bounderies.


Wink

Garret
04-26-2006, 01:21 PM
you just made your turbo dodge .25 cents more valuable to the general public LOL

Looks good man :)

Rattlesnake
04-26-2006, 06:42 PM
This is mine.http://memimage.cardomain.net/member_images/11/web/491000-491999/491208_128_full.jpg
This is a real NASCAR boom pipe.
Inlet=3.50
lenght=3 feet
outlet=13 by 1 inch

Frank
04-26-2006, 07:40 PM
That is sweet!


Frank

boost geek
04-26-2006, 07:55 PM
This is mine.http://memimage.cardomain.net/member_images/11/web/491000-491999/491208_128_full.jpg
This is a real NASCAR boom pipe.
Inlet=3.50
lenght=3 feet
outlet=13 by 1 inch
That is TOOOO COOOL!!!
Where'd you get it?:thumb:

85_600
04-26-2006, 09:14 PM
http://memimage.cardomain.net/member_images/10/web/2086000-2086999/2086441_207.jpg

Is that really how much room there is from the end of the cat to the first 90* bend or can that be made more? I was thinking of using at least a 24" glasspack, if not longer. From the looks of this pic, I don't think anything longer would fit..

BTW: Where did you find that Camaro tip? Junk Yard? I may just be doing the same thing. That is too cool, next to the other one posted above :thumb:

Rattlesnake
04-26-2006, 10:05 PM
That is TOOOO COOOL!!!
Where'd you get it?:thumb:
At local race store, BSR.

turbomopar87
04-27-2006, 11:22 AM
Rattlesnake...yours is way cooler...lol :thumb:


http://memimage.cardomain.net/member_images/10/web/2086000-2086999/2086441_207.jpg

Is that really how much room there is from the end of the cat to the first 90* bend or can that be made more? I was thinking of using at least a 24" glasspack, if not longer. From the looks of this pic, I don't think anything longer would fit..

BTW: Where did you find that Camaro tip? Junk Yard? I may just be doing the same thing. That is too cool, next to the other one posted above :thumb:


Yup, the exhaust runs right through all the stock tunnels there. That 90* bend was cut off the old cat-back system i had, and is in the same spot. I think that there was 37" of room between the DP and 90* (not 100% possitive on that # though, could be less), but it doesnt look like you will fit a 24" glass pack and a cat...i think my cat is like 16". You could cut the DP a little, i think there is about 6 inches of straight flat pipe, and move the cat up.

As for the tips, i joined a LS1 forum and posted a wanted add for them...those guys all upgrade their exhaust, so i figured they had the stock tips sitting around..i got 2 of them for $35.

I can make the 1 catback system as seen there(no muffler, just pipes) for $100 if anyones interested. Or just make the tip fit good onto a 12" long 3" pipe for $60. I have the extra 3" pipes and tip sitting around, so let me know.

lancer402
04-28-2006, 09:50 PM
Very nice Turbomopar87. I have a 3" pipe side exit now and it is hitting the ground a lot and closing off. I need to get one of these as well. I would like to see it on your car. Can you post a pic?

andy

WOP'R
04-29-2006, 02:18 PM
rattlesnake

got a sound clip or vid of the car with the exhaust?

Rattlesnake
04-29-2006, 05:33 PM
rattlesnake

got a sound clip or vid of the car with the exhaust?
I'm waiting for my cal that Mr Paul from Turbos Unleashed has for over 2 months:banghead:
I'll put one here as soon as I get it.

turbomopar87
04-29-2006, 05:36 PM
Heres the pics of the intall...sits ok for now, i gotta get it on a lift to get the hangers set up better. The claps are the only thing that hang too low, but i plan on welding the brakets on so the clamps will be eliminated soon.

The tip sits on that slight angle, which i am going to fix when i get the hangers settled

man does it sound great, and i definatly am going to get a sound clip soon.

http://memimage.cardomain.net/member_images/10/web/2086000-2086999/2086441_215.jpg

http://memimage.cardomain.net/member_images/10/web/2086000-2086999/2086441_217.jpg


theres more pics in the link, scroll to the bottom half of the page.

http://www.cardomain.com/ride/2086441/7

lancer402
05-01-2006, 08:35 PM
Nice pics, thanks
I have got to get me one of them.

andy

finallall
05-13-2006, 01:11 AM
Here's mine on an Omni. It's only 2.5" but should flow good, and be relatively quiet. That's a Dunomax in there.
http://public.fotki.com/finallall/dobshadow/hpim1069.html
http://public.fotki.com/finallall/dobshadow/hpim1068.html
http://public.fotki.com/finallall/dobshadow/hpim1070.html
Feel free to brouse the album.
Enjoy.

WOP'R
05-13-2006, 05:50 AM
how loud is it finallall??

RedDeerGLH
05-14-2006, 12:07 AM
how loud is it finallall??

from what he told me it should be one of the quietest side exits that you can get because hes not a fan of really loud side exits.

Jay

finallall
05-30-2006, 12:17 AM
how loud is it finallall??

Been driving the car for a week now. Exhaust sounds awesome. No drone and very throaty sound yet it's still quiet enough for me (and my wife) lol. I love it. Sounds like my full length dynomax system but throatier. I give it an 8 out of 10. :thumb: