NEED HELP! I need bearing...i have numbers..but unsure!

[89ShelbyGuy]

Hey guys..i decided to check the bearings on my bottom end to be on the safe side and found the mains are wore..luckly the crank isn't scored at all...well bearly...i have the numbers of the bearing and was woundering if someone could tell me the correct size i need:

Mains: Clevite 77 MP 2863P (Underneat that number is 0.25mm)

and the

Rod: I don't know the brand name...KC? Heres the part number: C424 AM
and underneath that it says: 2C 0.75

If anyone can crack the code that would be VERY helpful!

Thanks

Tom

[BadAssPerformance]

Simon in 3... 2... 1...

Ummm... not sure, but is the .25mm a .010" under bearing for a cut crank?

[89ShelbyGuy]

according to the fwd performance site..it is. any idea on the brand name of the rod ones?
it has a logo like KC or somethin.

[89ShelbyGuy]

I found the brand name of the rod...its a king Bearing.