View Full Version : 89 t2 balance shafts
thefitisgay
05-24-2009, 03:44 PM
motor is in an 89 shelby daytona i was curious if they were there so i know if i have to remove them or not
any help is appreciated :thumb:
turbovanmanČ
05-24-2009, 04:23 PM
Look at the oil pan, if it has BS's, it will be deep with an angled section, if none, it will have kind of a Crop circle bottom.
Why remove them?
thefitisgay
05-24-2009, 06:00 PM
i thought they like to blow up when you start making decent hp? the pan is flat accross the bottom
turbovanmanČ
05-24-2009, 07:00 PM
i thought they like to blow up when you start making decent hp? the pan is flat accross the bottom
No, RPM kills them, not power.
Take a pic of the pan and post up.
thefitisgay
05-25-2009, 11:37 AM
i hate barrowing cameras
i thougth the ones without the balance shafts had something about the size of a coffee can sticking down down in the middle forthe pickup?
135sohc
05-25-2009, 12:14 PM
http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode=BK&PartNumber=2002745&Description=Oil+Pan+-+Automotive+Engines
Thats a 2.5/balance shaft pan.
non BS has a very defined 'sump' in the center with the drain plug in the back.
tryingbe
05-25-2009, 12:30 PM
89 TII 2.2L block would not have a balance shaft.
turbovanmanČ
05-25-2009, 12:45 PM
89 TII 2.2L block would not have a balance shaft.
Unless someone put a used engine in, :o
turbovanmanČ
05-25-2009, 12:46 PM
i hate barrowing cameras
i thougth the ones without the balance shafts had something about the size of a coffee can sticking down down in the middle forthe pickup?
Yes, hence the crop circle bottom I mentioned, ;)
thefitisgay
05-25-2009, 03:16 PM
i didnt know what you meant by crop circle.... so uhhh how exactly do i find out what ive got...idk which numbers to post up or where to look them up
tryingbe
05-25-2009, 03:29 PM
Unless someone put a used engine in, :o
Unless someone put a used TI 2.5L or TIV 2.2L or TIII 2.2L.
But a 89 TII will not have balance shaft.
Common block oil pan without balance shaft.
http://www.thelostartof.net/tryingbe/forsale/oilpan/oilpan2.jpg
turbovanmanČ
05-25-2009, 05:17 PM
Unless someone put a used TI 2.5L or TIV 2.2L or TIII 2.2L.
But a 89 TII will not have balance shaft.
Exactly, you never know what people do when their engine blows, :o
thefitisgay
05-25-2009, 05:44 PM
ok thats what i needed thanks!!
hey why isnt this in the knowledge center?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.