Big turbo sale!

[glhs727]

Turbonetics found us some s60 turbos and a bunch more turbine housings. With the discontiunation of the s60 covers and .63 chrysler turbine housings, plus add in the price increase (new msrp of over $930) for a turbonectics t4/t3 hybrid- if you wanted one of these, now is the time to get one! Limited quatities!

Choices -all come with CHRYSLER turbine housings!!!
turbo only- Just turbo w/o swingvalve
complete kit- includes turbo, 2.5 swingvalve, s/s turbo lines, billet oil return, billet WGA bracket and new WGA. Basically everything needed to install!

s60 with .63 turbine housing with F1 turbine wheel. these are direct bolt in like a t-2 garrett, no fab needed.
turbo only $749
complete kit $1059

s60 with f2 wheel (1 ONLY!!)
turbo only $749
complete kit $1059

S50 to4E (big housing) with F2 wheel in .63 turbine Chrysler housing
turbo only $779
complete kit $1099

Thanks,
Cindy

[glhs727]

Ok,
I only have 3 -s60/F1 and 1 s60/F2 left
and 4 of the to4E big s50/f2 turbo's left.
I also have 1- s60/f3 t-3 flange turbo available. This would be great for a spirit R/T
later,
Cindy

[Mario]

Cindy, could you tell me the difference between a Stage I wheel and an F1 wheel? I'm unfamiliar with the wheels on the T03 Turbines. If you could point me in the direction for more info that'd be fine too. Searching for F1 Turbine Wheel is a little tough.

[glhs727]

The f-1 wheels are only slightly bigger than the old s1, s2 etc.. wheels. They are a more efficient design that moves more air/less back pressure. I will try and follow up with more info tomorrow when I have more time.
later,
Cindy

[Mario]

Thanks Cindy.

[glhs727]

quote directly from Turbonetics

"Turbonetics new F-1 turbine wheels are designed with the latest exhaust flow technology to provide you with the lowest back-pressures possible at extreme boost pressures. This new generation of turbine technology responds faster than any wheels before it while still allowing the most HP for each wheel size."

so basically spools faster and has less back pressure..........

[glhs727]

OK, all s60/f1's are sold.
I ONLY have (2) s60 with f2 wheels available and (2) T04E s50/f2 with Chrysler .63 left.

[amoparacer]

hey cindy do you still have one of these. T04E s50/f2 with Chrysler .63 left. if not can you just buy the center section and a compressor housing i have a super60 that needs a rebuild I could just upgrade it my self.

Lynn

[glhs727]

yes, I have that turbo in stock. I'll call you later today.