Some 2 piece porting/restoration.

[Mopar318]

I finished up the 2 piece this morning after work. So I figured I would snap a few pictures. I port matched the upper, and lower halfs. Ported the TB opening to for a 52mm TB. I did not port the head ports, since I am using a stock cleaned up head for now, so I will touch that on the next setup. I media blasted the lower intake because it was pretty filthy. The upper was in good shop still and has most of the factory coating so I left it alone.

What do you think?

http://i32.photobucket.com/albums/d48/Mopar318/006-1.jpg

http://i32.photobucket.com/albums/d48/Mopar318/004.jpg

http://i32.photobucket.com/albums/d48/Mopar318/003-1.jpg

http://i32.photobucket.com/albums/d48/Mopar318/002-2.jpg

http://i32.photobucket.com/albums/d48/Mopar318/001-2.jpg

http://i32.photobucket.com/albums/d48/Mopar318/005-1.jpg

[turbovanman²]

Looks terrible, :wow1:

Looks very nice, maybe paint the lower with clear to keep it looking new.

Nice welding on the header, :thumb: :hail:

[135sohc]

I need to get a media blaster :(

Looks good

[Mopar318]

I need to get a media blaster :(

Looks good

I wish I had one of my own. I work in Aviation and there is prob a 20k dollar cabinet there I used. Took off all the finish in about 5 minutes.