PDA

View Full Version : Need ARP Spec


Mr overkill
05-01-2009, 07:55 PM
I need the following


Head stud
Main Stud
Rod bolts




Thanks i cant seem to find my paperwork this second
turbovanmanČ
05-01-2009, 11:02 PM
Check the old FAQ's,

http://www.turbo-mopar.com/forums/showthread.php?t=6416&highlight=specs
Mr overkill
05-02-2009, 08:27 AM
thanks Turbo
BadAssPerformance
05-02-2009, 08:53 AM
Dude, Simon, really? 85 is kinda high with moly lube?
pauly_no_van
05-02-2009, 12:59 PM
FWIW
I just estimate final torque value of tty fastener.

[EDIT]head 90 - I read somewhere that if the tty bolt does not turn at a 90' lb setting, its good. Others have agreed 90 is the number arp/tty for an 005 HG. Some go higher.[EDIT]

main 60
rod 70
motor runs like raped ape so far bout 1000 miles on it honed ringed all bearings.
rotating assy from different block.

paul
BadAssPerformance
05-02-2009, 01:15 PM
FWIW
I just estimate final torque value of tty fastener.
head 90
main 60
rod 70
motor runs like raped ape so far bout 1000 miles on it honed ringed all bearings.
rotating assy from different block.

paul

ARP studs are not tty
Juggy
05-02-2009, 02:17 PM
I lifted my head on 18psi and 75fpt ARP head studs/moly

got it decked .011 this time around im going to go with 90fpt
pauly_no_van
05-02-2009, 08:42 PM
ARP studs are not tty

I know.
[EDIT]head 90 - I read somewhere that if the tty bolt does not turn at a 90' lb setting, its good. Others have agreed 90 is the number arp/tty for an 005 HG. Some go higher.[EDIT]
shadow88
05-02-2009, 09:45 PM
I'll vouch for Simon with the rods. They're 100% 50 foot pounds. I have the paper for that one. I can't say for the others.
Speedeuphoria
05-03-2009, 12:14 AM
To me the ARP head studs torque has always been generic as mine came with instructions that say 75FT/LBS alum head and 65ft/lbs for Iron head. 85 ft/lbs is similar to the stock tty bolts and is a good range IMO
puppet
05-03-2009, 10:08 AM
Yeah ... careful about over torquing studs. You can blow a HG that way too.
turbovanmanČ
05-04-2009, 12:44 PM
Dude, Simon, really? 85 is kinda high with moly lube?

We've been thru this already, lol. I got this number from the high HP guys on here so thats why I use, so far, no issues except this time with my Cometic, but I didn't put any sealer on it, :(