85_600
04-17-2006, 04:08 PM
Up for sale is my last dream – A 1985 Dodge 600.
This dream has 46k miles, as can be seen in my gallery, and is virtually rust free. I say virtually because there is one tiny spot of rust on the drivers side right where the door meets the body.
This dream will also include the following parts for a T2 conversion:
2.5” down pipe.
One piece intake with a TB attached.
Two T2 exhaust manifolds.
A known working MAP sensor.
A logic module from a 1987 Daytona Shelby Z
A “spare” logic module with extra pins for the conversion.
The wires to convert to a 4 wire O2 sensor.
Two “front” 5 lug wheel hubs with calipers and pads (The pads appear to be some what new – Just ask 5sp Mini – he’s the person I received them from)
1986 distributor.
Brand New Autometer "Auto" Boost/Vaccum Gauge - Never Used.
I’m sure I’m forgetting something so just ask – I can double check.
The bad portion of this dream is that there is a stumble in the idle that has been diagnosed as a “possible” cracked piston. The compression reads as, going from passenger side to drivers side:
150 90 120 125
The “90” cylinder, when a teaspoon of oil was added, went to 100 on the compression test.
Otherwise, this dream is good to go to a free home so that someone else can have a dream to live out.
I know there can’t be any price attached to a “dream” but this one does:
$1800.
This is VERY negotiable – Just make an offer. I’m up for any.
I hope this will make someone else happy!
You can either PM me or email me at megadeus@wadsnet.com
My dream is located in Northern Ohio, 44017
Pics can be seen here http://www.wadsnet.com/~megadeus/Pics/
This dream has 46k miles, as can be seen in my gallery, and is virtually rust free. I say virtually because there is one tiny spot of rust on the drivers side right where the door meets the body.
This dream will also include the following parts for a T2 conversion:
2.5” down pipe.
One piece intake with a TB attached.
Two T2 exhaust manifolds.
A known working MAP sensor.
A logic module from a 1987 Daytona Shelby Z
A “spare” logic module with extra pins for the conversion.
The wires to convert to a 4 wire O2 sensor.
Two “front” 5 lug wheel hubs with calipers and pads (The pads appear to be some what new – Just ask 5sp Mini – he’s the person I received them from)
1986 distributor.
Brand New Autometer "Auto" Boost/Vaccum Gauge - Never Used.
I’m sure I’m forgetting something so just ask – I can double check.
The bad portion of this dream is that there is a stumble in the idle that has been diagnosed as a “possible” cracked piston. The compression reads as, going from passenger side to drivers side:
150 90 120 125
The “90” cylinder, when a teaspoon of oil was added, went to 100 on the compression test.
Otherwise, this dream is good to go to a free home so that someone else can have a dream to live out.
I know there can’t be any price attached to a “dream” but this one does:
$1800.
This is VERY negotiable – Just make an offer. I’m up for any.
I hope this will make someone else happy!
You can either PM me or email me at megadeus@wadsnet.com
My dream is located in Northern Ohio, 44017
Pics can be seen here http://www.wadsnet.com/~megadeus/Pics/