PDA

View Full Version : new



94dusterde
04-13-2009, 05:16 PM
ok i have used the search but cant find relly what im looking for
whats out the for a 3.0 v6 94 duster

2.216VTurbo
04-13-2009, 05:37 PM
Welcome. :thumb: You found the 3l section so you aren't doing to bad, did you read some posts there? I'm not a 3l guy but there are a few oddballs here who are:p Brent? Josh? Help a bruther out over here...

Turbo3Iroc
04-13-2009, 05:44 PM
I'm not a v6 guy either but I just happen to have a 94 Duster minus the drivetrain in my yard right now. Green body tan interior, need anything? :eyebrows:

It's going to heaven tomorrow.

Murphy
04-13-2009, 09:10 PM
what are you looking for? general upgrades?

94dusterde
04-13-2009, 10:55 PM
any thing under the sun i have a 92 camaro v6 84 supra inline 6 and a 80 aspen 225 slant 6 z28 beter lol i love you burn outs lol mopra or no car lol i love all but ford

Murphy
04-14-2009, 12:07 AM
You should check out my page to see the things I have done. A good place to start would be...

52mm TB - the one you need to get depends on your transmission. If you have a 3 speed you need a TB off of a 87-88 3.0. if you have a 4 speed or a 5 speed you can use a TB off of a 3.3l.

better flowing intake - a cone filter right off the TB works best

exhaust - 2.5" is about the best size, I have the super turbo muffler which is louder than stock but not too loud

under drive pulley

thats pretty much it for the performance bolt ons. there are plenum spacers being made, they are about $80 a set. if you want I can send you a link. while your in there you can port your intake plenum for some extra power.

if you really want to get into it, you can go with diamante cams and pistons. the pistons are 10:1 and the cams move your powerband up.

http://www.robskorner.org/faqs/3litrefaqs/3litrefaqs.html

http://thedodgegarage.com/30v6.html - kinda old, but still some good info

http://www.turbododge.com/forums/f69/ - another 3.0 section on another forum

Ondonti
04-15-2009, 04:31 AM
lol I almost was going to say mod the camaro till it said v6 :P

This is my current 3.0 experiement
http://www.turbo-mopar.com/forums/showthread.php?t=36388

94dusterde
04-15-2009, 08:08 AM
whats up with the computer thinf over heating i dont like the sound of that

Ondonti
04-15-2009, 06:31 PM
It doesn't so you can ignore those myths.

Vigo
04-16-2009, 04:28 PM
ignore those myths.

^X1000000 :thumb:

Honestly i would base some of your upgrade path on what transmission you have.

Auto or manual?

stuff that you should do no matter what:

52mm throttle body.

Intake of some kind that uses a high flow filter and COMPLETELY DISCARDS the stock piping and airbox. That 180* pipe? POS. stock airbox? POS. You can stick a filter right on the tb if you want, or pipe it down under the battery for a CAI, as long as you get rid of the stock stuff, lol.

I also enjoy 180 degree thermostats.

Advancing the timing is something i would do, but for some reason i have never ever had ping on advanced timing on 87 octane and some other people seem to, so i cant say its foolproof. I would advance it to 15*, imo.

Murphy
04-16-2009, 04:50 PM
oh ya i have the 180* t-stat too and my timing is advanced to about 17*

94dusterde
04-16-2009, 07:49 PM
ok so the computer burning up is not going to hapen and i have the 3 speed
95,000 ml

94dusterde
09-07-2010, 11:27 PM
oki know im in the rong spot but im looking at a 93 sundance 2.5 tbi i want a little dodge like that to play with its a 125 for the car 5speed but i dont no if the 200 someting bottem end could handle me just puting the turbo stuff on

87turbodance
09-15-2010, 09:02 PM
#1 upgrade in my opinion - 5 Speed swap!
Get a 3.0 over a 2.5 TBI!!

Vigo
09-16-2010, 12:58 AM
Unfortunately we dont have a tbi section here.. im all over this forum and see people asking about them from pretty frequently but noone is asking for a TBI section so we dont have one.

Anywho, i modded a tbi lightly and got it to make ~115-120 hp with simple stuff, but the bottom line is it will not go very fast.. i had it in a light Aries with a 5spd and it still would only trap 77 mph. The TBI throttle body is a huge obstacle to making power and noone has really tried swapping on anything different (although i have some ideas).

As for whether a tbi bottom end with 200k miles on it (is that what you meant?) can be turboed... yep, it sure can. It doesnt have as durable of pistons as a turbo motor but the rods are the same as the early turbo motors and the cranks are the same as most turbo motors. If you keep it from running lean or detonating the TBI bottom end can definitely handle stock boost levels and give you double the torque you're getting right now.

c2xejk
10-10-2010, 03:27 PM
ok i have used the search but cant find relly what im looking for
whats out the for a 3.0 v6 94 duster

Advance the timing to ~15 degrees. Much more and you start losing power.

52mm TB. If you want a little more, I can port it for $25.
or 58mm TB or 60mm TB(I can can port these too)
Cold Air Intake (aka CAI)
Ported upper intake. $150
Ported lower intake. $50
Ported heads. stage 1 & 2 available.

For the really aggressive, turbo headers.

When I get the TB and Intake both for porting, I port match them as well.


Ed Kelly - www.kmperformance.com

BadAssPerformance
10-10-2010, 10:41 PM
whats up with the computer thinf over heating i dont like the sound of that


It doesn't so you can ignore those myths.

Not sure about SMEC/SBEC's but Power Modules in the older cars do overheat w/o airflow.

Vigo
10-11-2010, 12:39 AM
Afaik every v6 app is SMEC or SBEC.. with the possible exception of the 87 3.0 van.

94dusterde
03-11-2012, 09:54 PM
wow long time away from here got bizzy with my supra and all well the duster is still all most 100% stock has 104k on it now its 100% show car only now

Sundance 6g72
03-11-2012, 10:27 PM
got any pics of the supra and duster together?

94dusterde
03-12-2012, 12:19 PM
http://sphotos.xx.fbcdn.net/hphotos-ash4/s720x720/429252_3088916296446_1070125687_3655432_422351836_ n.jpg



http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/320266_2128877656080_1070125687_3151882_4682467_n. jpg
no i dont but i do have theas thats dads lt1 z28 and 350 v8 s10

---------- Post added at 12:19 PM ---------- Previous post was at 12:17 PM ----------

http://sphotos.xx.fbcdn.net/hphotos-ash4/249869_1946116887175_1070125687_2937239_6254369_n. jpg

thats the beast one i got with both

Ondonti
03-13-2012, 05:25 AM
Sad to see nice P bodies because there are so few.