PDA

View Full Version : General: WTB: Turbo II Cruise Control Servo Bracket



HoverFish
04-13-2009, 01:51 AM
D'oh! After dropping in my TII IC/rad combo I see that the intercooled cars must have had a different cruise control bracket, so if anyone has one to sell, or even send me some photos of it and I could fab my own, it would be appreciated. For an 89 J body, G body should be the same.

martin kolner
04-13-2009, 02:39 PM
4458108 is the Mopar #

bradp
04-13-2009, 07:02 PM
You can flip the cruise bracket around under the battery tray and it will clear the lower intercooler hose. You can use the TC bracket that mounts on an angle or the later shock tower cruise bracket. I do have one of the TC brackets if you're interested.

HoverFish
04-13-2009, 09:29 PM
Oh, I didn't even think of flipping the bracket. I'll try that out. I can't really use the later shock tower bracket as that's where my clutch cable runs.

bradp
04-13-2009, 10:24 PM
One thing is you may have to trim a small piece of plastic off of the bottom of the battery tray, sometimes I have to and sometimes I don't...depends on the car.