View Full Version : Fuel line question?
TurboII
04-12-2009, 11:44 AM
Okay i have a 88 chrysler lebaron Turbo? and i have a 2 piece manifild. My question is which fuel line is the feed line and which is the return. my sizes are 1/4 and 5/16. which one is which?
Joey
t3rse
04-12-2009, 01:05 PM
the smaller line is always the return
TurboII
04-12-2009, 02:08 PM
the smaller line is always the return
Not on my car its the other way around, i just firgured it out. 1/4 is fuel feed and 5/16 is returned.
I've never seen that. You better check the routing back by the fuel filter. Somebody screwed something up.
A.J.
GLHNSLHT2
04-12-2009, 02:37 PM
yep pressure line is 5/16" return is 1/4". +1 to what AJ said.
TurboII
04-13-2009, 12:59 AM
hmmmmm i shall have a look see
butchsuppe
04-13-2009, 01:16 PM
If you're that unsure, disconnect both hoses and see which hose fuel comes out when turning on the key Homer. DUH.:D
BadAssPerformance
04-13-2009, 01:27 PM
If you're that unsure, disconnect both hoses and see which hose fuel comes out when turning on the key Homer. DUH.:D
And there you have it :thumb:
I have heard of some people switching the lines (which you have to do on both ends) to get lower fuel pressures when running large injectors, the 1/4 line was the bottom limit. this is not the correct way to do it, but if you add a new larger feed line, it can be done. ok, sorry for side track :)
jamesmonty
04-13-2009, 01:28 PM
+1 to what everyone else said. Smaller is always the return. If it is not its wrong. You need to fix it if it is.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.