l body bobble strut bracket install questions

[bgbmxer]

putting a 555 in the l body ad i bought the poly bushings bobble strut and bracket from them. where does this get mounted compared to the stock dogbone bracket? anyone have measurements or pictures

[bgbmxer]

anyone?

[turbojerk]

I relocated the factory bracket inboard about 1".

[bgbmxer]

I relocated the factory bracket inboard about 1".

so one inch inward from the factory location. did you do any bracing

[mock_glh]

Use the inboard side of the stock bracket and add another piece to the K-member where needed. The unused side of the old bracket can be removed or bent out of the way.

[bgbmxer]

Use the inboard side of the stock bracket and add another piece to the K-member where needed. The unused side of the old bracket can be removed or bent out of the way.

bought the braket from polly bushings so im gonna use it but if it starts on the inboard side then i know exactlly where to mount it now. wouldnt have asked but the motor trans and k member are all out of the car so i could not do it myself and i want to have all the welding done before i put my new bushing on