View Full Version : Turbos/Intercoolers: .63 turbine housing for t3
bgbmxer
03-08-2009, 12:05 PM
looking for .63 turbine housing for are t3 turbos and the turbine wheel also
BadAssPerformance
03-08-2009, 12:09 PM
Is something wrong with your turbine wheel? The stock wheel will fit in either the .48 or .63 housing as long as they are turbine housings for stock wheels and not the new F1 wheels.
bgbmxer
03-08-2009, 01:29 PM
wouldnt that depend on what stage the housing is etc and nothing is wrong with my wheel but either way i have to fine the housing
BadAssPerformance
03-08-2009, 01:31 PM
Yes the stage wheel and housing need to match. So since your wheel is good (and I'm guessing stock?) you need a .63 housing for a stock wheel :thumb:
bgbmxer
03-08-2009, 04:34 PM
yes and yes thanks for the info. now i just need to find one
bgbmxer
03-09-2009, 08:15 PM
bump ...
turbovanmanČ
03-09-2009, 09:28 PM
Hard to find used and remember, you must make up your own DP setup, nothing exists anymore for a simple bolt on, but I do have one for sale.
If you want to upgrade, I have a stage III wheel and matching housing and even the FM elbow so you can use your stock DP, :thumb:
bgbmxer
03-09-2009, 10:07 PM
Hard to find used and remember, you must make up your own DP setup, nothing exists anymore for a simple bolt on, but I do have one for sale.
If you want to upgrade, I have a stage III wheel and matching housing and even the FM elbow so you can use your stock DP, :thumb:
pm me some pics and a price please
turbovanmanČ
03-10-2009, 02:30 AM
pm me some pics and a price please
http://www.turbo-mopar.com/forums/showthread.php?t=33969
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.