PDA

View Full Version : New wheels??


30 PSI SHADOW
03-01-2009, 02:56 PM
there is some "bling" to it, but i like them. just wanted to see what anyone else feels about them.


http://www.discounttiredirect.com/direct/findWheelDetail.do?bp=5-100&pc=73273&counter=1&wd=16&rw=7

these would go on the rampage. the only thing is its 38mm offset. Whats stock for an L-body??

bill
turbovanmanČ
03-01-2009, 03:02 PM
They should work fine, stock is around 35mm, and I think they will look nice, :thumb:

Kelly is really good at this, :nod:
JDAWG
03-01-2009, 03:30 PM
http://www.discounttiredirect.com/product/wheels/mbmdri.c.ang.jpg
i like them
30 PSI SHADOW
03-01-2009, 04:17 PM
38mm offset, will they be " in" more than stock?
Polygon
03-01-2009, 06:03 PM
Stock is 40mm. I can't remember is that will be in or out.
turbovanmanČ
03-01-2009, 06:09 PM
Stock is 40mm. I can't remember is that will be in or out.

Yeah, I think your right, as they are only a 6 inch wheel, or 6.5 in some cases.

The bigger the number, the further they sit in.
Turbo3Iroc
03-01-2009, 08:19 PM
They should work fine, stock is around 35mm, and I think they will look nice, :thumb:

Kelly is really good at this, :nod:

He called me like 10 mins after you posted that lol.

I like them Bill.
supercrackerbox
03-02-2009, 03:48 AM
Personally, if they have them in a polished or painted finish, I'd opt for that. I've had a lot of experience with aftermarket chrome plated wheels where the plating lifts up where the bead of the tire seats, causing the chrome to peel, and the aluminum to corrode badly around the bead to the point where the tire will no longer seal.

If Chrome is the only option, then do NOT allow anyone to balance them with clip-on weights, not even on the back side. Tape weights ONLY.