View Full Version : General: 2pc throttle cable
Mike_Shepard
02-22-2009, 09:56 PM
Does anyone have a 2pc throttle cable from a daytona? I put a 2 pc on mine and the cable it to short and when connected the TB is at 3/4 open. I've got cash in hand and paypal waiting for anyone who has one
GLHNSLHT2
02-22-2009, 10:08 PM
did you have a 1 piece intake? If so take the bracket off the stock TB and put it on your 2 piece TB and use your stock cable.
turbovanmanČ
02-22-2009, 10:55 PM
did you have a 1 piece intake? If so take the bracket off the stock TB and put it on your 2 piece TB and use your stock cable.
+2, same cable.
Mike_Shepard
02-22-2009, 10:58 PM
I did have a 1 pc and had the 1 pc bracket on the 2pc but there was a ton of slop in the cable
GLHNSLHT2
02-22-2009, 11:28 PM
shouldn't of been anymore slop than what you had stock, if so just put some spacers in the cable at the throttle pedal.
Mike_Shepard
02-22-2009, 11:37 PM
I'll go back out and try it again
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.