TurboGLH
03-30-2006, 12:17 AM
Right now when you insert a link using the button in the message box, you can only insert the link. So if I wanted to post a link to a Turbo Calculator you would see this.
http://www.squirrelpf.com/turbocalc/index.php?target_peak_power=400&engine_disp=183&target_af=11.8&bfsc=0.51&max_ic_loss=1.7&rpm_redline=6000&rpm_peak_power=5500&rpm_max_boost=3500&rpm_min_boost=3000&vol_1=89&vol_2=93&vol_3=90&vol_4=87&intemp_1=90&intemp_2=120&intemp_3=135&intemp_4=140&pre_company_id=2&pre_family_id=3&calc=yes&company=2&family=3&product=3
But I know the board software has the option to use a "Display Text" option, where it shows what ever you want as the link text but still goes to the correct page, like so.
3.0/400hp/11.8AFR/0.51BSFC (http://www.squirrelpf.com/turbocalc/index.php?target_peak_power=400&engine_disp=183&target_af=11.8&bfsc=0.51&max_ic_loss=1.7&rpm_redline=6000&rpm_peak_power=5500&rpm_max_boost=3500&rpm_min_boost=3000&vol_1=89&vol_2=93&vol_3=90&vol_4=87&intemp_1=90&intemp_2=120&intemp_3=135&intemp_4=140&pre_company_id=2&pre_family_id=3&calc=yes&company=2&family=3&product=3)
Can we enable this option? It makes all the difference in the world in my opinion.
http://www.squirrelpf.com/turbocalc/index.php?target_peak_power=400&engine_disp=183&target_af=11.8&bfsc=0.51&max_ic_loss=1.7&rpm_redline=6000&rpm_peak_power=5500&rpm_max_boost=3500&rpm_min_boost=3000&vol_1=89&vol_2=93&vol_3=90&vol_4=87&intemp_1=90&intemp_2=120&intemp_3=135&intemp_4=140&pre_company_id=2&pre_family_id=3&calc=yes&company=2&family=3&product=3
But I know the board software has the option to use a "Display Text" option, where it shows what ever you want as the link text but still goes to the correct page, like so.
3.0/400hp/11.8AFR/0.51BSFC (http://www.squirrelpf.com/turbocalc/index.php?target_peak_power=400&engine_disp=183&target_af=11.8&bfsc=0.51&max_ic_loss=1.7&rpm_redline=6000&rpm_peak_power=5500&rpm_max_boost=3500&rpm_min_boost=3000&vol_1=89&vol_2=93&vol_3=90&vol_4=87&intemp_1=90&intemp_2=120&intemp_3=135&intemp_4=140&pre_company_id=2&pre_family_id=3&calc=yes&company=2&family=3&product=3)
Can we enable this option? It makes all the difference in the world in my opinion.