PDA

View Full Version : Engine: TAFT S2 cam for sale


amoparacer
10-30-2008, 09:58 PM
Hey this thing has been great run 1000 miles. No signs of wear. No core charge
$135 shipped in US. If you wana see a picture of it check out my S2 S2+ side by side thread under engines.:nod:
Clay
10-30-2008, 10:18 PM
regrind right? gotta shim the lifters correct?
jrye68
10-30-2008, 11:08 PM
got a head to go with it?
turbovanmanČ
10-31-2008, 02:14 AM
regrind right? gotta shim the lifters correct?

Yes and yes.


got a head to go with it?


Yes, PM me for details if he doesn't have one.

Sorry to hijack. :o
amoparacer
10-31-2008, 06:41 PM
It is a regrind and I set up my head to run no spacers. So I didnt keep the ones that cam with it. But all they are is 30 thousands washers under the lifters
OmniLuvr
10-31-2008, 10:44 PM
what if u uses pt lifters? i have two shims per lifter for those already?
amoparacer
10-31-2008, 11:03 PM
I do not know are they taller by 30 thou or so. What you do is install the cam and lifters with lifter compressed on the bottom of lobe you use a feeler gage to make 50-65 thou of clearance with lifter compressed. Check all lobes and add shims or subtract as needed to adjust for clearance.
turbovanmanČ
11-01-2008, 01:31 AM
what if u uses pt lifters? i have two shims per lifter for those already?

3 smaller shims work fine, I used an S2 with 3 shims, PT lifters, it just works, ;)