View Full Version : Installing Auto Meter electric fuel pressure gauge
Turbo_Rampage
03-27-2006, 09:00 PM
Hey, I just bought an Auto Meter electric fuel pressure gauge for my Rampage and i have a few questions on how to install it. http://www.autometer.com/cat_gaugedetail.aspx?gid=2822&sid=15 It came with a 1/8" NPT sendor and i was wondering where and how i should install it on the fuel line? Could i just put a brass T between the fuel rail and FPR line are would the brass tee restrict the fuel flow back to the tank? Also is their any places that sell a good selection of brass fittings?
Thanks
Turbo_Rampage
03-27-2006, 09:25 PM
Could i just make a brass fitting like this and put it on the rubber fuel line between the FRP and fuel rail?? http://www.stealth316.com/2-fp_install.htm
turbovanmanČ
03-27-2006, 10:01 PM
Or just do this-
http://i12.photobucket.com/albums/a228/turbovanman/Canoncamerapics145.jpg
AND DON'T USE THE RETURN LINE, you won't the proper pressure reading.
Turbo_Rampage
03-27-2006, 10:13 PM
Thanks for the pic! so i put the brass T on the pressure line closest to the fuel rail, right? Will the brass T cause any kind of restriction?
turbovanmanČ
03-28-2006, 12:05 AM
Yep, and NO.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.