PDA

View Full Version : General: Clean out my shop!


iangoround
10-23-2008, 11:53 PM
I've got some stuff from old projects kicking around the shop that I don't want anymore. MAKE AN OFFER ON ANYTHING. Prices are completely negotiable.


2 T1 log manifolds. Both with rail/injectors/regulator. $20

1 Black Turbo valve cover 2pc gasket design $10

Logic Modules: $10
1 Turbo M/T 1985 (p/n 5226795)
1 Turbo M/T 1986 (p/n 5227533)
Both were pulled from my cars during swaps to 87 electronics.
iangoround
10-27-2008, 12:04 AM
All right then, make me an offer on this stuff. I just want it out!
iangoround
10-27-2008, 09:52 PM
G Head is gone
iangoround
10-28-2008, 10:43 AM
Updated parts list and SMEC descriptions up top.

Also, I have two ZIF sockets and two 27C128 chips sitting here. I could socket either SMEC and burn you any calibration you provide. For an extra $2 I can use 27SF512 chips instead. The 27SF512 is an EEPROM where the 27C128 needs to be erased with a UV light.
shelbydodge155
10-29-2008, 03:46 PM
i was wondering the 89 smec could u calibrate it for a 89 dodge daytona es automatic t2 2.5l? let me know i might be intrested
iangoround
10-30-2008, 01:32 PM
I might be able to do something like that. PM me with your setup details.
MNmopar
10-30-2008, 11:58 PM
paypal just sent for the tail lights...:thumb:
iangoround
10-31-2008, 02:05 PM
Got it! Should go out by Tuesday. I'll PM you a tracking number when it does.
shelbydodge155
11-02-2008, 07:39 AM
sent out paypal for that 89 cal u were talking to my dad about i sent it out yesterday

thanks josh
iangoround
11-03-2008, 11:03 AM
Got it
iangoround
11-04-2008, 02:19 PM
bump. still have some stuff left
iangoround
11-04-2008, 10:26 PM
I'd be willing to trade as well. Looking for a set of +40s
iangoround
11-05-2008, 09:49 PM
Updated the list. BUMP
iangoround
11-09-2008, 01:11 AM
Also: socketed 87 LM. $50. I might even have some chips I could throw in with it. I've got it in an older case with the internal map removed. Makes swapping chips out a breeze.

I'm considering ditching my laser and working only on the C/S. The laser is currently mostly dissassembled, so there may be parts available off of that as well.