GIANT SALE crazy bargains on sheetmetal, wheels& more!!

[BIGBRUDDA]

Old story: I need more garage space. SO I'm liquidating my inventory of 2nd gen 87-91 Daytona parts!!!!!:clap:



1) rear cowl, blk
2) sets of taillights, 1 good, 1 not so
1) set mirrors, elect
1) nose cone, blk89, with headlight motors
1) 88 air dam,fair condition,split pass crnr
1) 89 GFXs(front airdam,side skirts, and rear bumper cover)
1) 88 GFXs
1) 89 twist knob sunroof, W /2" roof flange cutout(will fit anything):amen:
A) BOX full of door and hatch gaskets
2) Alum "TURBO" valve covers
1) Draw-tite class 3 reciever hitch for 91-95 Caravan #75142:ballchain
2) rear spoilers, 1) 87, 1)88,1) lazer

2) headlight logic modules( worked when last used)
1) grey tri-spoke leather steering wheel
1) digital temp/AC contro

1) Kelsey Hayes electri brake controler
2) part boxes full of Holley carb tuning pieces jets power vlves, pump cams springs, metering blocks
1) set pop-up headlight cover/w side skirts
2) good ,1) ok, 1) bent ,TSW "montage" wheels 19x8(5x112 bolt circ), 2 good wheels are mounted with 245x45 bridgestones:confused:


In accordance with TM rules each piece is $100 until you..................

PLEASE,PLEASE! ! PM me your crazy low OFFERS ! Ask for pics !( takes time to rummage):nod: Can package for shipment at cost.

OR come pick thru my garage while at SDAC !!

[ShelGame]

Is the airdam the one like on the '87 C/S (non GFX cars)?

[BIGBRUDDA]

I have an airdam on the 88 nose cone. Try me Rob, c'mon. I'm easy these days!:nod:

[1983Rampage]

Too bad you live in Cincinnati, I would love to get a hold of those 89 ground effects. Shipping on them would just be ridiculous.

[BIGBRUDDA]

Contact Larry Buford .See if he's comin to turbopalooza. He usually does.

[1966 dart wagon]

pm'd :D

[1983Rampage]

LOL, I have been trying to get a hold of him for the past few days, with no luck. But I will keep trying.

[BIGBRUDDA]

I'll get pics of the mirrors and airdam this wknd (66Dart).
Gotta get a digi-cam and go over the garage.:nod:
I'll get pics of the GFXs also.(Rampage)
The Larry Buford post(#5) was for you Rampage . Larry lives in Kansas. And usually comes to our events(turbopalooza 10/25). Alone, in his RWD Sundance. Then drives right back.:hail:
He maybe agreeable to carryin stuff. $$:thumb:

[BIGBRUDDA]

Here's some pic.

[1983Rampage]

Yah, I know Larry, I have hung out with him quite a bit. I talked to him the other day, but forgot to ask. BTW, how much for the ground effects for the 89-91 Daytonas?

[1966 dart wagon]

the mirrors have too short of cable on them, i have a longer cable, not sure what year those are but mine are for an 89. about the air dam, well you think its junk i see opportunity since i cant find one anyways, plus i can fix that, I've fixed worse plastic pieces, how much shipped to 57106? If shipping wont kill me i still might be interested. Pm me with the amount.

Thanks,
Jack

[seanjnl1]

Do you have one of these rear hatch panels? Color is gray.

http://www.moparautos.com/images/10072008%20001.jpg

PM sent

Greg

[jamesmonty]

I just might need some daytona parts....ill talk to you tomorrow.

[1966 dart wagon]

wow ya shipping is going to kill me, i wont be able to afford that at this time, do you by any chance have the center button for the shift knob of an a555?

[ChargedDust]

Old story: I need more garage space. SO I'm liquidating my inventory of 2nd gen 87-91 Daytona parts!!!!!:clap:


2) headlight logic modules( worked when last used)


You're not talking about a BCM are you?

[jamesmonty]

Thanks for the stuff! Too bad the front end on my daytona is all f'ed up. Oh well.

[BIGBRUDDA]

wow ya shipping is going to kill me, i wont be able to afford that at this time, do you by any chance have the center button for the shift knob of an a555?

Yes, I have 1 in my trophy case. Try a $1 Sakajaweeeeeeaaaahhhh! coin. Or a budlight bottle cap like all the cars at the JY!:D

[BIGBRUDDA]

You're not talking about a BCM are you?

I'm talkin the plastic oval module found in the dash speaker hole.

[BIGBRUDDA]

:bump2:

[BIGBRUDDA]

Packaging items and wheighing for shipment today! Others have taken advantage of this oppurtunity!

WHY NOT YOU!:clap:

[BIGBRUDDA]

:bump2: updated list

[BIGBRUDDA]

RE UPDATED LIST New items found lurking in the corner. That you NEED!:bump2:

[BIGBRUDDA]

BUMPITY BUMP check out updated inventory!

[Reeves]

I want the carb to play with on my Rampage. And the carb parts that go with it.

Bring to KartaPalooza?

Give me a *low* price! Economy sucks you know!

[BIGBRUDDA]

OK buddy!!:clap:Better yet I send along a radiator for recoring. I'll be at the Moonbow!:D

[mario03SRT]

OK buddy!!:clap:Better yet I send along a radiator for recoring. I'll be at the Moonbow!:D

Yo Dawg,

Can you or Tracy bring me a 2.2 dipstick for a 85 block for the Phoenix to Kartapalooza?

[BIGBRUDDA]

:bump2:Time to look over it again

[Reeves]

1) 88 GFXs

2) Alum "TURBO" valve covers

1) 525 trans 80K miles


1) ATWOOD auxillary heater / AC/ fan From travel van



The big parts gotta go!

Does the 88 GFX's include the rear bumper cover? If so, what color?

What year valve covers? 89 and up or 88 and earlier? If 89 and up, I'll take them!

What final drive is the 525 trans? If 3.05 or 3.50 I'll take it!

Any pictures of the auxillary heater/ac/fan unit? Might be a cool or HOT addition to the pimp van?

I'm just trying to help!

[BadAssPerformance]

Hey, Brudda, gotta post prices for everything, per the rules. :thumb:

And how much for the manual mirrors? What year are they out of?

[Reaper1]

If you have pictures of the sunroof I may be interested depending on the condition of it!

[BIGBRUDDA]

Sunroof pics on the way.
Off an 88 JT , and just for you $10:eyebrows:

[BadAssPerformance]

Sunroof pics on the way.
Off an 88 JT , and just for you $10:eyebrows:

Aww, so kind :) PM sent...

Oh, and I think you figured out how to get around the rules ;)

[Reeves]

Sunroof pics on the way.
Off an 88 JT , and just for you $10:eyebrows:

Where's my reply? :confused2:

[BIGBRUDDA]

Where's my reply? :confused2:

STIFLE BEOTCH!!!!! Yo next!

Here's some pics of the heater/ac. From my 84B250 travel van R.I.P.
the gfxs are LOLA leftovers, no rear bumper cover tho
1 of each valve cover
I'll hafta check on the trans. Its originaly outa my car:nod:

[shelbydodge155]

do you have any of those plastic trim peices for the ttop doors they look like hockey sticks

Thanks
-Josh

[BIGBRUDDA]

Yes I do Josh. I keep them in a locked display case.:number1:
Sorry those are not for sale..................at this time.:nod:
The "official term" for those are "beltline trim".
And if straight,enmolested,w/good mounting tabs. "Theyz quite a find"!! Second only to new "upper roofline gaskets".:love:
But then you prolly know that by now.:amen:

[BIGBRUDDA]

Aww, so kind :) PM sent...

Oh, and I think you figured out how to get around the rules ;)

Dats what big bruddas are for!

[Shadow24]

still got the 89 rear disc stuff? that doesnt have the prop or MC right? im just up the road a piece in Columbus :)

[BIGBRUDDA]

I have the prop valve and the M/C but the M/C didn't look good.
I got spindles, hubs,backing plates,calipers,rusty rotors, and the fastners and doo-dads.:grouphug: Its the internal shoe E brake/vented rotor setup from an89 GTC.
packed in 5 gal buckets for "easy shipping and handling":eyebrows: about 50 lbs total!:ballchain:

[BIGBRUDDA]

STILL A GOOD SUPPLY OF G BODY PARTS Buy a "souvenier" while at SDAC:amen:
I'll even mark them "SDAC-19". For outstanding resale value on Ebay!:eyebrows:

[TurboII]

PM sent to u!

[Mr overkill]

1) Draw-tite class 3 reciever hitch for 91-95 Caravan #75142 how much shipped to 07026

[Mr overkill]

actually would this fit a 89 90 caravan

[BIGBRUDDA]

maybe! Check the draw-tite web site. Its heavy, anybody you know commin to SDAC?

[BIGBRUDDA]

BUMP:bump2:

[Turbo3Iroc]

I need some G body door gaskets, might as well get a hatch also.

[BIGBRUDDA]

GREAT IDEA !! go shopping at BIGBRUDDA auto supply while in town. I'll arrange a "private viewing " Kelly:D

[Turbo3Iroc]

Oh I didn't mean a whole hatch, I have one of those. Just the gasket!! Might take you up on the offer though. The yards up here suck.

[JDAWG]

still have the hitch? Wanna measure the the width bolt hole to bolt hole?

[BIGBRUDDA]

OK ,gimme 24 hrs

[BIGBRUDDA]

Hitch bolt hole dimensions are 37' wide.3) 5/8" holes each rail, spaced at 9,3/8" and 14,3/4". reciever box is 9" drop, or 9'' from bolt pflange to reciever.

[JDAWG]

Hitch bolt hole dimensions are 37' wide.3) 5/8" holes each rail, spaced at 9,3/8" and 14,3/4". reciever box is 9" drop, or 9'' from bolt pflange to reciever.

thanks, pm sent

[BIGBRUDDA]

:bump2:Last bump before SDAC. Come and see me ,we'll talk parts. maybe go to the garage.

[BIGBRUDDA]

pics of the 92 IC

[puppet]

Didja get my second PM ?
Got the pic's you sent out.

[vxvxAndrewxvxv]

Pictures of louvers plz? they will fit an 87 Z? are they shippable?

shelbstrocity@gmail.com

[BIGBRUDDA]

SORRY..............louvers are SOLD:o

[ShelGame]

How much for the I/C shipped to 48189?

[BIGBRUDDA]

BUMP for turbopalooza!!!
Come one ,come all to "trader Tims garage"!!!!:cheer2:

[Captain Chaos]

3 spoke wheel still available? Pics?

[BIGBRUDDA]

Lemme search the data base/garage:confused:

[54inches]

Is post#1 still accurate?

[BIGBRUDDA]

just edited today.