PDA

View Full Version : 18 slot rim



daytonafastback
09-20-2008, 11:16 AM
i have a 1986 daytona turbo with the 18 slot rim now did dodge make one rim size for that rim ? and what are the tire sizes i can use ?

cordes
09-20-2008, 11:34 AM
Use this guide to figure out which wheels you have and if the list doesn't tell you what you want to know, then we will be able to if we know the common name of the wheels you have.

Clay
09-20-2008, 12:48 PM
is it the same as this guide?

cordes
09-20-2008, 01:43 PM
is it the same as this guide?

I believe it is smarty pants. This one I will actually link to is a bit different though.

http://www.turbo-mopar.com/forums/vbarticles.php?do=category&categoryid=8

daytonafastback
09-20-2008, 03:38 PM
this is a 18 slot rim and no the guide does not have it:(


http://www.wheelcollision.com/wccpix/1412.jpg

Vigo
09-22-2008, 12:13 PM
read the wheel size stamping from the backside of the wheel. it should be on one of the spokes or in the flange area. Im pretty sure all those rims were 14s. I dont know if they were 5.5 or 6 inches wide. probably 5.5. If so you cant do much as far as tires if you're looking for 'performance'. Probly the only 'performance' street tire setup on a 14x5.5 is a
195/60r14, falken rt615 or hankook rs-2 being the most aggressive in that size. However that is a very short tire and will look funny unless you are lowered a lot and it will send your highway rpm through the roof if you're auto.. In normal size tires id just get any old 195/70r14 and not complain when it sucks, or save some money for 15s. options in 15s get a LOT better.