PDA

View Full Version : Installing new struts + Koni's out back Q?



JonsGottaDusta
09-18-2008, 05:43 PM
Hey Everyone,
Well I have a pair of MP struts to put on Leboring and have a few questions. The car is slowly going out of alignment(fully rebuilt front end? :confused: that pulls to the right) and I am wanting to change out the struts. Is it possible to go a few weeks with the new struts before needing an alignment? Or will it squeal around corners, etc? Also I already put the -1" eibach springs in the back with the adjustable Koni's. Well I just found out they are adjustable... which way do I turn them so they ride softer? This car currently rides like a freaking track only car and I am about to lose it with all the rattles, and feeling EVERY bump, dip, etc.

Let me know what you think.

- Jon:thumb::thumb:

Vigo
09-18-2008, 07:46 PM
its perfectly fine to run the struts without the alignment for a while. make sure you get your camber bolts tightened down real good cuz those tend to be the thing that will drift out of spec.

turbovanmanČ
09-18-2008, 08:43 PM
Try to use a measuring tape to get the toe close or your going to chew your tires down in days.

I believe its anti clockwise to soften them.