Parting 2 GLH's - lots of stuff

[Reeves]

Parting an 85 and 86 GLH. Both red paint, 1 with grey interior, 1 with the red/maroon interior. The 86 GLH is pretty rotted out, the 85 is great but frame rails are rotted out.

Alot of stuff is available. Please just ask. Some of the grey interior plastic pieces have already been asked for.

Parts will not be shipped yet, unless they are small and really worth it to you. They will be available for pickup at my garage in Augusta, KY, or possible pickup at my work in Northern Kentucky or delivery to TURBOPALOOZA on October 25th!

[85shelbycharger]

Does either car have the front and rear bumper guards??

[glhturbo1985]

Are the B-pillar pieces broken on the top where the seat belt comes through? If they are intact, BE CAREFUL WITH THEM! They are impossible to find! I'm interested if so.

[black86glhs]

James,
I am looking for the headlight bezels, rear bumper ends and a grill. Please let me know if you have them and if they are available. Thanks.

Bryan

[Rebel Rob]

do either of them have a center console if so how is the actual arm rest pad?

[Clay]

Are the B-pillar pieces broken on the top where the seat belt comes through? If they are intact, BE CAREFUL WITH THEM! They are impossible to find! I'm interested if so.

They're broke.

[Clay]

do either of them have a center console if so how is the actual arm rest pad?

both split open

[TheCanadian007]

Do you have the front/side ground effects intact from either the Omnis? If so, give me a shout when you're open to shipping said parts. Many Thanks.

[10G OMNI]

Do you have the grey door top part that th lock goes through,in decent shape.

[contraption22]

How badly are the b-pillar pieces broken?

[Clay]

Do you have the grey door top part that th lock goes through,in decent shape.

nope, the grey interior has the newer one piece door panels in it.

(Im just trying to answer these questions as I remember them from the cars!! I hope Im not stepping on your toes Reeves!!)

[Clay]

How badly are the b-pillar pieces broken?

the top pieces are broken off of them. I dont remember any other cracks or anything.

[Clay]

Do you have the front/side ground effects intact from either the Omnis? If so, give me a shout when you're open to shipping said parts. Many Thanks.

Ill let Reeves give the details but I believe they both have complete ground effects.

[Reeves]

Does either car have the front and rear bumper guards??

I only pulled one bumper guard so far from the front of the 85. It was good shape with only one bump mark (where it had *bumped* something).



James,
I am looking for the headlight bezels, rear bumper ends and a grill. Please let me know if you have them and if they are available. Thanks.

Bryan

One grille was missing and one grille was broke. I do have headlight bezels. Rear bumper ends and front bumper ends are the same, just turn them upside down and switch sides. I have two of those so far. I do not have a grille.


do either of them have a center console if so how is the actual arm rest pad?

Arm rest pad on the 85 grey interior was split. Mechanism still works though.


Do you have the front/side ground effects intact from either the Omnis? If so, give me a shout when you're open to shipping said parts. Many Thanks.

Not open to shipping yet and one front air dam has a crack that has been repaired. Other set of ground effects I'm probably going to keep for myself.


Do you have the grey door top part that th lock goes through,in decent shape.


nope, the grey interior has the newer one piece door panels in it.

(Im just trying to answer these questions as I remember them from the cars!! I hope Im not stepping on your toes Reeves!!)

You are 100% fine Clay. I really appreciate the help! I have a bad memory. So what year are the two piece door panels?


the top pieces are broken off of them. I dont remember any other cracks or anything.

Thanks cause I couldn't remember since Warren removed them.

[contraption22]

If you've got a decent repairable front airdam and a grille, i will take them. I can pick them up at Palooza.

[turboshadow]

big rods from the 85?:eyebrows:

[Reeves]

If you've got a decent repairable front airdam and a grille, i will take them. I can pick them up at Palooza.

I think the one that has a split is pretty presentable and repairable. I'll have to make it to Fleck's again to get more stuff, so I can check it out in more depth then.


big rods from the 85?:eyebrows:

They are going to the yard. Just didn't have time to get them.

[1983Rampage]

Were either turbo with a manual trans? I am looking for a few shift rods and pivots from a l-body turbo cars.

Thanks.

[Reeves]

Were either turbo with a manual trans? I am looking for a few shift rods and pivots from a l-body turbo cars.

Thanks.

Both were turbo and manuals.

[Clay]

Darn it! shift rods! thats what I forgot to grab! ;)

[fleckster]

big rods from the 85?:eyebrows:


Nathan, if you want them that bad, come up when we have the next parting out party in a few weeks! (KokoMopar2: Electric Boogaloo) It should be an even better time!!!

[Reeves]

Nathan, if you want them that bad, come up when we have the next parting out party in a few weeks! (KokoMopar2: Electric Boogaloo) It should be an even better time!!!

+1 :thumb:

Parts that get there right the first time + Headlights that work + trailer tires that don't explode - drug sniffing dogs = Onehelluvagoodtime! :p

[1983Rampage]

How much would you want for the shift rods and pivots from both cars? Shipping to 66502.

[Reeves]

How much would you want for the shift rods and pivots from both cars? Shipping to 66502.

I don't have them yet. They are still on the cars at the cars are at Fleck's. I can get them next time though.

[Reeves]

Some things I have in my possesion right now (that I need to get rid of) are:

Rust free red GLH hood. Some minor dings.
Rust free red GLH passenger front door. Some minor dings.
Reman GLH alternator from the 85.
Reman distributor complete from the 85 (old style).

[1983Rampage]

That will work. Just remember to grab the pivots/arms that have the little balls on them. And I am wanting both. Thanks.

[Reeves]

Some things I have in my possesion right now (that I need to get rid of) are:

Rust free red GLH hood. Some minor dings.
Rust free red GLH passenger front door. Some minor dings.
Reman GLH alternator from the 85.
Reman distributor complete from the 85 (old style).

Mopar Performance Logic Module from the 85.
Mopar Performance/Direct Connection A-525 manual trans girdle new in box.
Napa reman power module from the 85.

[jamesmonty]

What do you want for the hood? And I might be interested in the 85 MP LM. PM me on the price of both, I can pick them up.

[Rebel Rob]

what does the girdle do can i see pics aut1634@cup.edu and price plus shipping to 15438

[guyd_15]

I need the plastics off the steering column (red prefered).

[Reeves]

What do you want for the hood? And I might be interested in the 85 MP LM. PM me on the price of both, I can pick them up.

PM'd


what does the girdle do can i see pics aut1634@cup.edu and price plus shipping to 15438

I don't have pics of anything yet. You can do a search for the trans girdle. They were the hot ticket way to strengthen a A-525 for racing abuse when they were still available.


I need the plastics off the steering column (red prefered).

I have the grey plastics in my possesion, but not the reds yet. I will be making another trip to Flecks to get more stuff and I can check them out then.

[guyd_15]

thanks, lmk

guy

[Rebel Rob]

ok what is the price and are you willing to ship?

[Reeves]

ok what is the price and are you willing to ship?

PM'd!

[jamesmonty]

Thanks for the hood and lm. Ill give you a bump too, someone but James stuff!

[Rebel Rob]

good price for that reeves but no cash right now sorry

[fleckster]

Bump for any remaining parts needed from these two GLH Turbos. We are finishing stripping them today so speak up...

We have the shifter stuff for you,1983 Rampage, if you want them...
I'll go out and check on the red plastics from the steering column in a little bit and make sure they are in good condition and I'll let you know if we can get them for you, Guy!

Anyone else?

[contraption22]

The possibly repairable front airdam.... How bad is it, how much do you want for it?

[1983Rampage]

Any word on the linkage from both cars?

[Reeves]

The possibly repairable front airdam.... How bad is it, how much do you want for it?

Come to Cincinnati's TurboPalooza on the 25th (bring Yuengling) and it's yours!!! Other very, very good offers will be available then. I have no room to store this stuff. This extends to everyone in attendance! Post here for what you want me to bring, or you can come to my garage and pickup (bring beer for better deals).


Any word on the linkage from both cars?

Have all linkages from both cars, with c clips and stuff. Have shifter from 86 car.

[1984rampage]

What about wiring harnesses? Both underhood and body harnesses!

[Reeves]

What about wiring harnesses? Both underhood and body harnesses!

I have the complete wiring harness from the 85 along with the inside harness. I have the underhood harness from the 86. Did not get the interior harness. I *may* be using one of these for my Rampage project if I ever start on it. Thinking about selling the Rampage just to x another project.

[contraption22]

Come to Cincinnati's TurboPalooza on the 25th (bring Yuengling) and it's yours!!!


Sounds like a deal. See you then!

[Reeves]

Sounds like a deal. See you then!


Mike,
I also have the original front air dam off my OMNI. The only thing wrong with it is one tab is broken behind the grille/bumper and it's painted gloss black. You can pick which one is better for you.

[1984rampage]

I have the complete wiring harness from the 85 along with the inside harness. I have the underhood harness from the 86. Did not get the interior harness. I *may* be using one of these for my Rampage project if I ever start on it. Thinking about selling the Rampage just to x another project.

lol, I was inquiring about the harnesses because I have my rampage torn down and am thinking about turboing it!

[LaserXT1986]

Some things I have in my possesion right now (that I need to get rid of) are:

Reman distributor complete from the 85 (old style).

Is this still available? With the hall effect in it? If so, how much shipped to 19036?

[guyd_15]

I still need the red plastics off the steering column!!!

Thanks,
Guy

[fleckster]

I still need the red plastics off the steering column!!!

Thanks,
Guy

I pulled them for you! James has them so send him a PM and work out the price and shipping info, etc. :thumb:

[Reeves]

Is this still available? With the hall effect in it? If so, how much shipped to 19036?

Yes, still available. I'll have to weigh it I guess to get a shipping quote. $30 sound good for the price complete?


I still need the red plastics off the steering column!!!

Thanks,
Guy

I have them.

[Reeves]

Here's some more stuff for sale:

(2) rear Koni's with GLH springs complete
(2) heavy duty style stock short axles
(1) reman passenger long axle
(1) intermediate shaft with newer CV joint and heavy duty style stock short axle still in it with carrier bearing and bracket
(1) complete 86 style distributor
(1) 86 stock GLH computer in really good shape

Lots more to come as I think of it and sort through it.

[contraption22]

Hey Reeves, how about the rear sail panels in the hatch area? are they decent?

[Reeves]

Hey Reeves, how about the rear sail panels in the hatch area? are they decent?

What color? We left the red one's, took the grey one's.

[omni_840]

How much for the rear Koni's & Springs?


Thanks

[contraption22]

What color? We left the red one's, took the grey one's.

So you have the gray ones? If they are ok, I guess I could always paint em.

[fleckster]

Here's what's left after the carnage:

http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_001.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_002.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_003.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_004.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_006.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_007.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_008.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_009.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_010.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_011.jpg

Does anyone remember seeing the '85? It has rather unique decals that make it stand out. I even found a picture I took from SDAC-8 and was surprised to see it in the pits at IRP (now ORP)! Here's the picture. It's the one in the middle with the red Pentastar and headlight covers.
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_012.jpg

Here's a couple close ups of the decals:
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_014.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_013.jpg


When we pulled the valve cover on the engine in the '86, there was a rocker thrown off and it broke a headbolt when we were pulling the head. Check out the rocker pad wear! Have you ever seen any that bad? We think ther oil passage was plugged or something.
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_015.jpg
http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_016.jpg

[1983Rampage]

http://www.turbo-mopar.com/forums/photopost/data/824/medium/Omnis_001.jpg


Ahh, and I was needing that little square out of the door. Dang it. LOL.

[fleckster]

LOL! That was used as the patch to fill the holes to shave the rear washer and key hole on the hatch of Reeves minivan by Clay.

[jamesmonty]

You might see that hood off that 85 at paloza this year. Of course it will be black and not have those unique stickers on it any more. Just need to get my dang pistons to show up and ill get my omni together!

[Reeves]

How much for the rear Koni's & Springs?

Thanks

$150 shipped


So you have the gray ones? If they are ok, I guess I could always paint em.

I think I do....I'll have to look. I know Kelly Gomer wanted some of the stuff.

[Turbo3Iroc]

I just need the pass side panel.

[LaserXT1986]

Is this (distributor) still available? With the hall effect in it? If so, how much shipped to 19036?


Yes, still available. I'll have to weigh it I guess to get a shipping quote. $30 sound good for the price complete?

That is fine, except it won't need to be shipped. Mike Marra offered to pick it up with his stuff at Turbopalooza (I think that is where he is meeting you). Is it ok if I give him the money to give to you in person?

Sorry for the delay in replying to this, hoping it's still available. Let me know. Thanks!

[Reeves]

That is fine, except it won't need to be shipped. Mike Marra offered to pick it up with his stuff at Turbopalooza (I think that is where he is meeting you). Is it ok if I give him the money to give to you in person?

Sorry for the delay in replying to this, hoping it's still available. Let me know. Thanks!

Yeap, still available, and yes, it is fine to give the money to Mike.