PARTING: 91 shadow es T1 5 spd 2 dr.

[glht_omni]

decided to part this one out, its straight but had at least 4 small rust holes in different area of the floor pans. it has a 88' 2.2 with a broken piston and they are .040" over so not much is good from the engine besides the crank and rods and accesories.

i will be starting a thread for the main stuff and prices, but if there is anything you want off of this car, make an offer before it goes to crusher on saturday, the roller is available for pickup anytime before then for $200 without wheels, the wheels will be sold and can stay on it if you pay extra with the roller. 3 tires match, 2 have 90% tread and the back 2 have 50-60% tread.

heres all 31 pics. http://s508.photobucket.com/albums/s325/glht_omni/91%20shadow/

here is what it look like

http://i508.photobucket.com/albums/s325/glht_omni/91%20shadow/91shadow004.jpg
http://i508.photobucket.com/albums/s325/glht_omni/91%20shadow/91shadow009.jpg
http://i508.photobucket.com/albums/s325/glht_omni/91%20shadow/91shadow001.jpg

[jl93sundance]

I can't see, does it have a center console with arm rest? Is it unbroken if it has one? If so i'm interested!

[glht_omni]

pm sent, thanks!

[WickedShelby88]

You should check your post count.. If your going to be parting it how much for the splash guards for the belts on the drivers and next to the trans on the pass. My moms car has neither. Also how is the shift knob? Wish I had the money and room for that roller. I want a shadow.

[glht_omni]

:evil: LOL (post count)
i may be selling the roller to jason in paw paw, mi.
if not $10 and shipping
the knob is worn but its not missing chunks or anything, if you want a nice looking one, i have a couple from 1g neons which are nearly identical, just shine more and they slide and clip the same way $10 + shipping
i'll let you know on the roller situation tomorrow.

[WickedShelby88]

Hey just yank the splash cover;) I don't think Jason will need it. More interested in those right now as my mom will be driving in the winter and it will cost me more to hunt one down.

[glht_omni]

the pass side is missing all together, just have the wheel well plastic but not the pulley/belt guard and on the driver side it is cut open real wide, so doesnt serve its purpose any more.

if you want a good shift knob, i have the noen ones which are exactly identical, the original is more of a leather feel and the neon is shiny and more plastic feeling, but mount the same.

$15 shipped if your interested.

by the way, jason is passing on the roller, so its all available for cheap before the crusher gets it.

[fleckster]

Is the trans any good? A-523, right?

[jl93sundance]

http://www.turbo-mopar.com/forums/showthread.php?t=29549

[glht_omni]

yes fleckster, its a good 523, has a newer clutch, pp and to bearing and the 3.50 final drive !!!
prices are OBO too, i am flexible.

[WickedShelby88]

Crusher:confused::eek:

[cqlink]

How straight is the hood? Is that a bolt-on or sticker spoiler?

[jl93sundance]

How straight is the hood? Is that a bolt-on or sticker spoiler?

That looks like the stock spoiler, just painted black

[glht_omni]

yup all the doors, hood and driver fender are straights the pass fender has a little dent that could be suction backed or popped back out from the back side.
the spoiler is a black painted factory bolt on es version.

YUP, dont have any storage area for it and scrap prices are up, if anybody wants the roller make an offer before its too late.....like tuesday morning.

[cqlink]

I'm interested in the spoiler for my Shadow convertible. Will send PM.

[glht_omni]

spoilers sold!

[WickedShelby88]

At this point would you consider cutting a section out of the rockers near the rear.

[glht_omni]

they arent in the greatest shape and gets flakey and soft in a few spots and the rear quarters have a nice slab of bondo in them.

[WickedShelby88]

Gotcha.. Not worth it then.. I can get some patch panels from JC whitney so I may go that route.

[glht_omni]

i wasnt aware they made specific pieces for any of these cars?

[135sohc]

I've only seen replacement outer rockers for P bodys

replacement panels (http://www.rustrepair.com/app2/onlinecat.htm?r=ms&p=sm)

[WickedShelby88]

Thats what I need. Inner doesn't matter in this case.

[glht_omni]

i am done pulling everything off of the car that has good value.
any last calls berfore its hauled off?

[cqlink]

Hi....Is the new head and the new turbo still for sale? Do you have any Mitsu SS lines?

[glht_omni]

shes found her final resting place at warhoops junk yard, leaving behind a set of pumpers and the for sale list of remaining parts.

[cqlink]

RIP....poor Bessie. She was a good 'ol gal :thumb:

[glht_omni]

more like an oily parts whore, lol.