GLHS alignment specs

[rare_ram]

I was reading that the GLHS had a more agressive alignment than the regular Shelby Chargers. Anyone know the specs?

[Marcus86GLHS]

1986 Shelby GLH-S Service manual supplement, section 2:

front camber: 0- 1/4 neg.
front toe total: 0- 1/16" in
rear camber: 0- 1/4 neg
rear toe total: 1/16" out - 3/32" in


these specs are unique to the GLHS.

[GLHNSLHT2]

over and over again. -1.5 in the front each side, -1.0 in the rear. 0 to 1/16" toe out in the front depending on bushings in the LCA. Shelby's specs are still way on the conservitive side. Better than stock but still set up to understeer. If you don't want to run as much camber as above keep the 1/2 degree split front to rear as it makes the car balanced. The above won't wear tires abnormally unless you drive 30k a year on just straight freeway. Do a Search, I have more detailed post's out there about this.

[rare_ram]

over and over again. -1.5 in the front each side, -1.0 in the rear. 0 to 1/16" toe out in the front depending on bushings in the LCA. Shelby's specs are still way on the conservitive side. Better than stock but still set up to understeer. If you don't want to run as much camber as above keep the 1/2 degree split front to rear as it makes the car balanced. The above won't wear tires abnormally unless you drive 30k a year on just straight freeway. Do a Search, I have more detailed post's out there about this.Sorry.