I need a pic of the valvetrain, stock cams!

[turbovanman²]

I need to see how much lifter is sticking out of the rocker arm, stock cams please. I don't have another motor here to look at.

[rich tideswell]

New billet TIII cams in the works Simon?

[turbovanman²]

New billet TIII cams in the works Simon?

I wish, the billets are way too much money and you guys are cheap azz's, :lol:

I do have some TIII cams in the works that will idle like stock and act like race cams up top.

I need this for my van, as no one can get my valves right, I need to see how close I got mine and I am ripping the head off now, I need to see how much of the lifter body sticks out so I can reset my valve stem length.

[glht_omni]

i looked but i dont have any with a good angle, but i can pull a valve cover tomorrow and snap a few good shots for you.

[bansheenut420]

I dont know if this will help or not, its kind of a crappy pic. But, I figured better than nothing...
http://memimage.cardomain.com/member_images/10/web/2038000-2038999/2038370_10_full.jpg
Thats when I broke a rocker. :love:

[turbovanman²]

Thanks guys. Cory, its too small, ;)

[LowSL2]

This is the best I can do. It's a camera phone pic. Don't pay attention to the one in the center. Hope it helps.

http://home.comcast.net/~lowsl2/rt/lifters.jpg

[turbovanman²]

^^^^^^^Perfect, thanks. :nod: :thumb:

[glht_omni]

since i said i would, here ya go, the last one has a ruler next to it;)
http://i32.photobucket.com/albums/d10/jkp9900/lifters001.jpg
http://i32.photobucket.com/albums/d10/jkp9900/lifters002.jpg
http://i32.photobucket.com/albums/d10/jkp9900/lifters003.jpg
http://i32.photobucket.com/albums/d10/jkp9900/lifters004.jpg

[turbovanman²]

That last pic, that rocker arm is at rest, IE no lift?

Thanks, great pics.

[glht_omni]

not sure, i'll go put the ruler up to the lifters next to that one and see where the cam is.
give me 10 min.

[glht_omni]

ok the last pic, in the last post, was with absolutely no lift.

this one is another no lift, right next to it (the ruler was sagging a little so take that into cosideration).http://i32.photobucket.com/albums/d10/jkp9900/lifters006.jpg


and these 2 pics are of the same lifter just different angle and are at the other end of the cam right on peak lift.
http://i32.photobucket.com/albums/d10/jkp9900/lifters005.jpg
http://i32.photobucket.com/albums/d10/jkp9900/lifters007.jpg

[turbovanman²]

Thankyou, those are great pics. :D

[glht_omni]

no problem, let me know if you need any more. the valve cover is still off and its not going anywhere for awhile, lol.