PDA

View Full Version : O2/Dawes Problem


show-off
03-17-2006, 06:55 PM
My Dawes quit working last friday and again today. (I only drive it once and a while) Now it is running rich and sputters at part throttle, but seems alright at full throttle. I think the 02 took a dump. What yall think?
shadow88
03-17-2006, 07:00 PM
Do you have a code for it?
show-off
03-17-2006, 07:07 PM
no that is the weird thing...no cel's
GLHSKEN
03-17-2006, 07:10 PM
It won't set the cel. You have to pull the code
show-off
03-17-2006, 07:27 PM
What is this?
code 34 - Speed Control Servo Circuit

Yeah, and code 51 O2 Leaned? ( I only use 110 on it 1 time and it was a new nippo sensor)
oldgregg
03-17-2006, 07:45 PM
What is this?
code 34 - Speed Control Servo Circuit

Yeah, and code 51 O2 Leaned? ( I only use 110 on it 1 time and it was a new nippo sensor)The 1st is either a bad crusie control, or you have no cruise hooked up.

The 2nd one is def an 02 issue.

Reset the computer (unplug battery for 5-10 minutes) & see if it dose sit again, if so, change the 02.
show-off
03-17-2006, 08:42 PM
I think I had some wiring issues. I have an exhaust leak around the 3" sv & dp and the shrink wrap seems to have melted through on some of the wires.

I have no cruise...so that would be it. I have reinstalled it, I will unplug the battery for a spell to see if that fixes it.
GLHSKEN
03-17-2006, 09:23 PM
YEA... answers.com hehehe :thumb:
show-off
03-18-2006, 01:07 AM
Seems to be running good again and the dawes in working too.
oldgregg
03-19-2006, 01:26 AM
Seems to be running good again and the dawes in working too.:nod: