PDA

View Full Version : Door lock gaskets?


TurbododgePirate
07-21-2008, 04:31 PM
Anybody have a part number for the door lock gaskets from dodge or any other source? You know those little plastic idiot gaskets that degrade to nothing over time.
overlordsshadow
07-21-2008, 04:34 PM
I'd like to get some also, as most of mine are way stretched or gone.
inmyshadow
07-21-2008, 06:18 PM
last I checked, you had to order a door handle to get the gasket.

later
87glhs
07-23-2008, 08:25 AM
A good locksmith, one who deals with door locks and ignition switches (there used to be a guy in our area who I swear had stuff from the 1920's), would have them if you're SOL at the dealer.

Think I saw another thread here recently regarding this--maybe try a search.
85shelbycharger
07-24-2008, 02:39 PM
I'll get the p/n from my two brand new door lock gaskets that are at home in my box of NOS goodies :eyebrows: :thumb: I'll post it up for you later. And no you don' thave to order new door handles to get them.
85shelbycharger
07-24-2008, 11:07 PM
Part number is 55074799
Clay
07-25-2008, 08:12 AM
retainer pn 2583377 $5.00 ea
seal pn 55074799 $3.35 ea

^^ I bought this stuff a couple months back for my omni. The retainer is the clip that goes on the back side and holds the lock cylinder in place. The old ones were corroded so I got new ones.
TurbododgePirate
07-25-2008, 09:08 AM
Thanks guys!!!
inmyshadow
07-25-2008, 03:27 PM
I've got good news and bad news.

The bad news, there were only two of the 55074799 in the country. Those are in boston, ma warehouse. I was hoping to order more then two. Ask the parts guy about more. He stated that those seals were the last two showing in any chrysler warehouse.


The good news? I ordered both of them just in time for the dealer to put its order it. I should have them tomorrow.

later
TurbododgePirate
07-25-2008, 04:03 PM
I've got good news and bad news.

The bad news, there were only two of the 55074799 in the country. Those are in boston, ma warehouse. I was hoping to order more then two. Ask the parts guy about more. He stated that those seals were the last two showing in any chrysler warehouse.


The good news? I ordered both of them just in time for the dealer to put its order it. I should have them tomorrow.

later


NNNOOOOOOOOOOOOOoooooooooooooooooooooooooooooooooo ooooooooooo!


Just got a set for $9 off ebay. Wow, that was easy.
inmyshadow
07-25-2008, 04:11 PM
If chrysler falls though, you will have to share your source.

I has some decent spares to use when I paint my car. As in life, new is better then newer.

later



NNNOOOOOOOOOOOOOoooooooooooooooooooooooooooooooooo ooooooooooo!


Just got a set for $9 off ebay. Wow, that was easy.
TurbododgePirate
07-25-2008, 04:23 PM
If chrysler falls though, you will have to share your source.

I has some decent spares to use when I paint my car. As in life, new is better then newer.

later

James, Absolutely, Just find locks for a 1971-4 challenger or, cuda, or charger, or a 1984-1990 ford bronco. The locks are all the same. The gaskets are all the same.