ShelGame
07-13-2008, 11:09 AM
This is really just a teaser for Turbonator T3 when I (finally) get it finished - hopefully by fall.
This is a stock T3 cal with CE Flash and the 2-Step added. The 2-step is a little more basic than the 'real' turbonator stuff. It only runs off speed. It's set to turn off above 3mph, but you can raise or lower that if you like (there's a constant in the table file for it). The CE Flash for knock is exactly the same as the T-SMEC code.
This cal also has OB turned off, the rev limiter set to 8192 (the max) and the speed limiter set to 255mph (also the max).
I made this for Simon, and thought I'd post it in case anyone else wants to try it out.
The table file is based on my 'old' dis-assy and so doesn't really match the naming conventions in any of the Turbonator cals. It should be pretty close to the names in the other SBEC cals I posted previously, though.
This is a stock T3 cal with CE Flash and the 2-Step added. The 2-step is a little more basic than the 'real' turbonator stuff. It only runs off speed. It's set to turn off above 3mph, but you can raise or lower that if you like (there's a constant in the table file for it). The CE Flash for knock is exactly the same as the T-SMEC code.
This cal also has OB turned off, the rev limiter set to 8192 (the max) and the speed limiter set to 255mph (also the max).
I made this for Simon, and thought I'd post it in case anyone else wants to try it out.
The table file is based on my 'old' dis-assy and so doesn't really match the naming conventions in any of the Turbonator cals. It should be pretty close to the names in the other SBEC cals I posted previously, though.