PDA

View Full Version : clips?


jimpotent
03-13-2006, 07:45 PM
I have a cable shifter set up in my omni, I have a problem in the car that the further cable from the driver pops off when ripping the gears:( . It has caused many bad runs down the track and needs to be fixed. Is there any replacement parts or other fixes for me to do?
cordes
03-13-2006, 07:49 PM
YOu probably need to replace the little bushing in the end of the cable. There is a good writeup on doing that with stuff from the help section of the parts store for cheap in the FAQ section if it indeed was moved there.
WVRampage
03-14-2006, 03:38 AM
you can also get booger bushings from ebay from a neon thats what is on the cables for the A 523 in my rampage.
Clay
03-14-2006, 10:03 AM
you can also get booger bushings from ebay from a neon thats what is on the cables for the A 523 in my rampage.

I think those only work on the 523/568 trans. So if you have a 520/555 dont buy em.

clay
dodgeshadowchik
03-14-2006, 10:28 AM
yea, my shadow's did the same thing. i found that a zip-tie works great for a temp. fix. i did buy some booger bushings for the car. here's the site on them (gives info on what transmissions they will work with):

http://www.boogerracing.com/indexbb.html

i beleive he is also a member of neons.org