15-8 wheels

[ohiorob]

I can't seem to find 15"-8" with a 4 1/2 or 4 3/4 back space with 4 lug-100mm
cheap not the $300+ ones. I'm going with the 15x10x26 M&H

[contraption22]

You can get steelies cheap. Anything else is gonna cost ya.

[Frank]

Companies out there make spacer/adapters that could help you go from 4lug to 5lug in common paterns that could also solve the backspacing problem.


Frank

[ohiorob]

You can get steelies cheap. Anything else is gonna cost ya.

who makes them?

[contraption22]

Give these guys a try. I am pretty sure they can make a wheel in any width and offset you could want!

http://www.diamondracingwheels.com/

[ohiorob]

thank you
that's what I'm looking for.

[Speedeuphoria]

Give these guys a try. I am pretty sure they can make a wheel in any width and offset you could want!

http://www.diamondracingwheels.com/


Thats the place I was going to mention.

Rob did you ever consider or see if a 13" wheel will clear?

I know a couple SRT4 guys fit some 13x8" wheels(5" BS fit but used a small spacer for extra clearance, not sure the rotor dia, I think they may be using regular neon rotors, 10"?? or they are at least thinner then the SRT4 rotors). They were talking about using M&H 25x8.7x13's since they are easier to fit. Or M&H has 26x8.5x13's also. I know everyone likes different tires, think Steve likes Hoosier, many like M&H's, ect..

[ohiorob]

I looked at all the tires out there. 8.5 wide do not work for me and i would think 8.7 would not be much of an improvement. MTs do not work will for FWD. I hear M&H works great for are cars. for the power i'm making i think 10x26 would be the way to go. it may take some work to make them fit but it should be worth it. I need to get this all done by the mopar nats.

[ATaylorRacing]

Here's something else to try.....
http://www.ezaccessory.com
makes adapters from 1" - 2" and you can even get a lug pattern conversion. Some RWD import guys got those and bought Mustang deep dish rims off of me for their cars. I sell 17x9, 17x10.5 sets for $545.

[ATaylorRacing]

Also......they seem safe enough as a local guy with a 275 hp 3 stage nitrous set up on his SRT8 is using them and runs 1n the 10.9s at near 140....twice the weight of our cars.....it's his dailey driver!

[Speedeuphoria]

I was thinking you would try something like this
http://www.turbododge.com/forums/f7/f28/176097-slicks-custom-rims-spindles.html#post1321237

[BadAssPerformance]

Cant see link

[Speedeuphoria]

Well Carl, dbltrbl has some 13x9.5" wheels and 24.5x9" slicks forsale, not sure if its listed on here also or not?

Edit: I found the thread here
http://www.turbo-mopar.com/forums/showthread.php?t=26704