PDA

View Full Version : yes, more Q's on the Balance shaft oil hole



JuXsA
03-10-2006, 10:21 AM
I just want to make sure that this is the only hole that needs to be blocked off for the balance shaft removel.
http://home.comcast.net/~juxsa/engine/30506/oilplug.jpg
I had the machine shop thread the balance shaft oil feed hole so I could plug it with a bolt. I just used a from a spare head I had and cut it down real short. I left a about 4 or 5 threads on it. I put some JB weld in the oil hole and then screwed that bolt down.

LEt me know if there is anything else I need to do.

Thanks

GLHS592
03-10-2006, 10:56 AM
That's it. You did what I did.

Whorse
03-10-2006, 11:21 AM
What thread size did you use?

JuXsA
03-10-2006, 02:51 PM
oh hell i dont know. One of the bolts that holds the cam mains down just about fit. It was a tight fit but I figure it sure as hell aint coming out:D