JuXsA
03-10-2006, 10:21 AM
I just want to make sure that this is the only hole that needs to be blocked off for the balance shaft removel.
http://home.comcast.net/~juxsa/engine/30506/oilplug.jpg
I had the machine shop thread the balance shaft oil feed hole so I could plug it with a bolt. I just used a from a spare head I had and cut it down real short. I left a about 4 or 5 threads on it. I put some JB weld in the oil hole and then screwed that bolt down.
LEt me know if there is anything else I need to do.
Thanks
http://home.comcast.net/~juxsa/engine/30506/oilplug.jpg
I had the machine shop thread the balance shaft oil feed hole so I could plug it with a bolt. I just used a from a spare head I had and cut it down real short. I left a about 4 or 5 threads on it. I put some JB weld in the oil hole and then screwed that bolt down.
LEt me know if there is anything else I need to do.
Thanks