View Full Version : Can anybody guess what this is?
shelbyES
06-02-2008, 09:58 PM
http://www.turbo-mopar.com/forums/photopost/data/792/thumbs/shelbyES_012.jpg (http://www.turbo-mopar.com/forums/photopost/showphoto.php?photo=8916) Hint: Its on the front of my car.
2.216VTurbo
06-02-2008, 10:00 PM
Wait, I'm seeing pics:thumb: Success:clap:
Looks like a 'factory' splice??
shelbyES
06-02-2008, 10:03 PM
Splice?
shelbyES
06-02-2008, 10:04 PM
Where the rust is the metal is torn!:eek:
lower rad support right by the front motor mount right.
straighten, weld, reinforce!
2.216VTurbo
06-02-2008, 10:07 PM
Yeah, but doesnt the smaller part (on the left of the pic) plunge inside the other part of the core support? Maybe it's an illusion...
shelbyES
06-02-2008, 10:09 PM
WINNA!!! when I bought the car it had to be towed from my friends house to mine cause there was no engine in it. he put the chain around the core support and one front brake was sticky and you know the rest!
shelbyES
06-02-2008, 10:10 PM
him and another friend where back there and I asked who put the chain on neither would admit to putting it on!:mad:
shelbyES
06-02-2008, 10:11 PM
Is there a spot for towing on Daytonas?
Menominee
dat da da da da
Menominee
dat da da da
Menominee
dat dah dah da da dah da da duh dat dah da da da
when I had to, I would prefer it around the k-frame
TurboJerry
06-02-2008, 10:13 PM
Usually the back of the K-frame or the control arm(s). The metal is much thicker there..... Opppps, Clay beat me to it!
shelbyES
06-02-2008, 10:14 PM
here's a better pic
http://www.turbo-mopar.com/forums/photopost/data/792/thumbs/shelbyES_015.jpg (http://www.turbo-mopar.com/forums/photopost/showphoto.php?photo=8915)
cordes
06-02-2008, 10:33 PM
What a bummer. I knew what the pic was of right away, but I was hoping it was the result of too much HP in an L-body. Bummer about the stupidity induced damage.
shelbyES
06-02-2008, 10:37 PM
Yeah it sucks, but I got another one out of a trashed shelby Z:thumb: Cut one out and have the other welded in!
looneytuner
06-03-2008, 09:54 AM
Or the guy in central Il installed angle iron because he twisted his with high hp.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.