Hybrid intake ??

[Anonymous_User]

Planning a hybrid build and I need to make an intake. I'm hoping I can fabricate it to clear the dizzy although it does not have to sit under the hood.

What would be a good intake to start with? Is there anything out there that I can use the flange and maybe some of the runners to begin with?

If it matters, I believe my head is the early 2.0 DOHC.

[boost geek]

How about one of these? I'll never use it if you wanna buy it.:eyebrows:

http://i91.photobucket.com/albums/k302/boostgeek/100_1473.jpg

[Anonymous_User]

Is that the cloud intake that wraps down around the dizzy?

That looks like it might make for a decent foundation.

What'cha want for it?

[rbryant]

Is that the cloud intake that wraps down around the dizzy?

That looks like it might make for a decent foundation.

What'cha want for it?

It is from an avenger/2gnt talon.

I also bought one of those thinking it would work well... The problem is that it doesn't clear the hood...

It would be a good one to cut off and weld a sheet metal plenum to though. Or if you don't have to clear the hood this will work great!

I am getting a full custom intake done by allmotormike on the neons list. He is local so it works out great for me.

-Rich

[TurbododgePirate]

I was going to say, I have a 2.4 minivan intake, very similar to the one posted, but it still has the water neck.

[Companynine]

Some of you might recall Russ Jerome's hybrid Omni, but that intake is sitting in my garage, and I will probably never use it.

It's made from a 2.4L minivan manifold, a 5"(?) diameter light pole, and a 68mm throttle body (4.7L V-8). It stuck out the hood about 4-5 inches.

Make me an offer.
http://www.extremepsi.org/gallery/albums/TimmAys_pics/DSC00347.jpg

[shelbyplaya]

How about one of these? I'll never use it if you wanna buy it.:eyebrows:

http://i91.photobucket.com/albums/k302/boostgeek/100_1473.jpg
what do you want for that intake?



Some of you might recall Russ Jerome's hybrid Omni, but that intake is sitting in my garage, and I will probably never use it.

It's made from a 2.4L minivan manifold, a 5"(?) diameter light pole, and a 68mm throttle body (4.7L V-8). It stuck out the hood about 4-5 inches.

Make me an offer.
http://www.extremepsi.org/gallery/albums/TimmAys_pics/DSC00347.jpg

what did you pay for it?

[boost geek]

I paid $30 for it at Pick a Part, but it doesn't have the fuel rail.

[TurbododgePirate]

Some of you might recall Russ Jerome's hybrid Omni, but that intake is sitting in my garage, and I will probably never use it.

It's made from a 2.4L minivan manifold, a 5"(?) diameter light pole, and a 68mm throttle body (4.7L V-8). It stuck out the hood about 4-5 inches.

Make me an offer.
http://www.extremepsi.org/gallery/albums/TimmAys_pics/DSC00347.jpg

Dang, if it only fit under the hood.

[Companynine]

http://www.extremepsi.org/gallery/albums/TimmAys_pics/DSC00347.jpg

what did you pay for it?

I bought the whole car. I wanted the engine for another car, but I don't want the engine sticking out of the hood. Don't worry, the Omni is in recovery after another purchaser made some changes that didn't work out.