View Full Version : Hybrid intake ??
Anonymous_User
05-16-2008, 01:22 AM
Planning a hybrid build and I need to make an intake. I'm hoping I can fabricate it to clear the dizzy although it does not have to sit under the hood.
What would be a good intake to start with? Is there anything out there that I can use the flange and maybe some of the runners to begin with?
If it matters, I believe my head is the early 2.0 DOHC.
boost geek
05-16-2008, 02:09 AM
How about one of these? I'll never use it if you wanna buy it.:eyebrows:
http://i91.photobucket.com/albums/k302/boostgeek/100_1473.jpg
Anonymous_User
05-16-2008, 03:50 AM
Is that the cloud intake that wraps down around the dizzy?
That looks like it might make for a decent foundation.
What'cha want for it?
rbryant
05-16-2008, 01:01 PM
Is that the cloud intake that wraps down around the dizzy?
That looks like it might make for a decent foundation.
What'cha want for it?
It is from an avenger/2gnt talon.
I also bought one of those thinking it would work well... The problem is that it doesn't clear the hood...
It would be a good one to cut off and weld a sheet metal plenum to though. Or if you don't have to clear the hood this will work great!
I am getting a full custom intake done by allmotormike on the neons list. He is local so it works out great for me.
-Rich
TurbododgePirate
05-19-2008, 05:39 PM
I was going to say, I have a 2.4 minivan intake, very similar to the one posted, but it still has the water neck.
Companynine
05-20-2008, 10:34 PM
Some of you might recall Russ Jerome's hybrid Omni, but that intake is sitting in my garage, and I will probably never use it.
It's made from a 2.4L minivan manifold, a 5"(?) diameter light pole, and a 68mm throttle body (4.7L V-8). It stuck out the hood about 4-5 inches.
Make me an offer.
http://www.extremepsi.org/gallery/albums/TimmAys_pics/DSC00347.jpg
shelbyplaya
05-21-2008, 12:37 AM
How about one of these? I'll never use it if you wanna buy it.:eyebrows:
http://i91.photobucket.com/albums/k302/boostgeek/100_1473.jpg
what do you want for that intake?
Some of you might recall Russ Jerome's hybrid Omni, but that intake is sitting in my garage, and I will probably never use it.
It's made from a 2.4L minivan manifold, a 5"(?) diameter light pole, and a 68mm throttle body (4.7L V-8). It stuck out the hood about 4-5 inches.
Make me an offer.
http://www.extremepsi.org/gallery/albums/TimmAys_pics/DSC00347.jpg
what did you pay for it?
boost geek
05-21-2008, 02:51 AM
I paid $30 for it at Pick a Part, but it doesn't have the fuel rail.
TurbododgePirate
05-21-2008, 08:34 AM
Some of you might recall Russ Jerome's hybrid Omni, but that intake is sitting in my garage, and I will probably never use it.
It's made from a 2.4L minivan manifold, a 5"(?) diameter light pole, and a 68mm throttle body (4.7L V-8). It stuck out the hood about 4-5 inches.
Make me an offer.
http://www.extremepsi.org/gallery/albums/TimmAys_pics/DSC00347.jpg
Dang, if it only fit under the hood.
Companynine
05-27-2008, 10:35 AM
http://www.extremepsi.org/gallery/albums/TimmAys_pics/DSC00347.jpg
what did you pay for it?
I bought the whole car. I wanted the engine for another car, but I don't want the engine sticking out of the hood. Don't worry, the Omni is in recovery after another purchaser made some changes that didn't work out.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.