NEW original turbos & heads from Mopar,VNT,T3,T2,T1

[ShelbyZ]

I still have the following original new stock chrysler 2.2l turbos. Turbos are all new original stock units from Mopar, never used, never had oil run through them.

Garrett turbo T3/RT…$400
http://inlinethumb10.webshots.com/42889/2622016500045830882S425x425Q85.jpg
http://inlinethumb59.webshots.com/37434/2267589670045830882S425x425Q85.jpg

Garrett T1 turbo....$150

http://inlinethumb18.webshots.com/40913/2829131990045830882S425x425Q85.jpg

They show signs of being a little dirty and with surface rust because they have been in a storage unit since the early 90’s.

Located in Windsor, Ontario, Canada.
More pics available if needed.
I take paypal.

Thanks,
John
Cell # 519-818-4343

[Juggy]

seen the stuff in person! the 2 piece is def a prototype style.....might be very useful for the california people??? it has an EGR attached to it...the charge air temp sensor and nipples are also in different locations!! the fuel rail is nice too...looks thick and possibly SS? injectors were odd as well the # was in a different location...not sure if someone could even reference these for flow #s?

[shelby zed]

would you sell the wg can from the t03

[shelbyplaya]

the VNT is soooo tempting... My 90 tona shelby needs a new VNT..........


loking for any trades or trade/cash?

[ShelbyZ]

sorry not seperating parts from the whole turbo units

[Polygon]

I'd be interested in the swirl head. Is it really new or is it a reman? Also, any cracks. I don't care much about the valves as I am looking for a unit to send out to the machine shop. So, just as long as the head would be a great candidate for a big valve job and a port and polish I'm interested.

[ShelbyZ]

Both heads are NEW not remans and no cracks. More pics available if needed just send me your e-mails.
Thanks
John

[Juggy]

the swirly is non X drilled FYI for those who are interested

[Polygon]

the swirly is non X drilled FYI for those who are interested

Ah, bummer, that counts me out then.

[ShelbyZ]

sale pending on T2 garrett.........

[ShelbyZ]

the swirl head has SOLD....:thumb:

[ShelbyZ]

I would now like $200 for the NEW G-head and the T2 is available but minus the 2.5" swingvalve now for $200 , sorry keeping it for my turbo project until 3" SV is available.

[Sgt Craig]

I would now like $200 for the NEW G-head and the T2 is available but minus the 2.5" swingvalve now for $200 , sorry keeping it for my turbo project until 3" SV is available.

Did you get my pm on shipping to the States for the T2?

[ShelbyZ]

Garrett T2 turbo, Garrett T3/RT turbo and swirl head have been sold, rest is still available. Thanks4 looking !

[Sgt Craig]

Garrett T2 turbo, Garrett T3/RT turbo and swirl head have been sold, rest is still available. Thanks4 looking !


Thank's for responding to my post or pm.

[ShelbyZ]

G head has sold, thanks

[ShelbyZ]

still available !

[shelby zed]

whats still available?

[ShelbyZ]

check top of thread..UPDATED

[roachjuice]

2 piece intake with the egr came on the 86 glhs cars.

[ATaylorRacing]

I would now like $200 for the NEW G-head and the T2 is available but minus the 2.5" swingvalve now for $200 , sorry keeping it for my turbo project until 3" SV is available.

What a bargain that was.....:hail:
I just spent over $400 to have a head pressure checked, milled .010, freshened up valve guides, new valve seals, and valve job for old Matchbox!:eyebrows:

[minigts]

PM about the 2 piece!

[Juggy]

What a bargain that was.....:hail:
I just spent over $400 to have a head pressure checked, milled .010, freshened up valve guides, new valve seals, and valve job for old Matchbox!:eyebrows:

G head is mine :thumb:


mini, the 2 piece is nice!!! i examined the lower half, and i bet you could remove the bumps from the runners, completely, like a 1 piece intake :eyebrows:

all this stuff is really nice too, casting is beautiful! because they were the 1st of thier kind! no core shift, the fuel rail that comes with it, looks alot thicker then the usual ones too. Im almost positive it had more meat, at the flange as well...like some of them modded/welded ones you may have seen on ebay

[minigts]

Hey I forgot to ask, but does the TB come with it? :)

[shelby zed]

im confused is the rt turbo available still?

[ShelbyZ]

2pc intake has been sold. The dodge T3/RT turbo is still available yes.

Thanks
John

[ShelbyZ]

takers ???

[89daytonacs]

do it gavin

[ShelbyZ]

$350 for T3 now !

[iTurbo]

I'll take it. sending you a PM..