PDA

View Full Version : Feeler: Dust Sheild for 2.0/2.4 engine with TD tranny



rbryant
05-01-2008, 07:38 PM
I am making one of these for my 2.4 with 568 tranny. Is anyone else interested in one?

8306


It is an overlay of the TD tranny sheild with the 2.0/2.4 tranny sheild. This covers the gaps that you get on the front of the engine with the 2.4 engine and TD tranny.

It is designed specifically for the SRT4 (reason for the fork in the lower right corner) engine that uses the bottom piece that connects to the oil pan but will also work with the older 2.4 setup. with the sheetmetal bottom sheild and metal support brace.

PM me if you are interested I am having the prototype cut with the rest of my waterjet work and should have pictures of the real one shortly.

Thanks,

Rich

BadAssPerformance
05-01-2008, 08:14 PM
PM sent...

BadAssPerformance
05-19-2008, 08:50 PM
Pics of the real one yet? Are they in stock?

rbryant
05-19-2008, 09:17 PM
I have to make a few mods to the lower rear where it had a little too much material in the fork area. I was able to tin snip it without a problem but I need to modify the CAD file and send it in to make a production run. It is probably 1-2 weeks out.

http://www.turbo-mopar.com/forums/attachment.php?attachmentid=8379

-Rich