WTB: 2.5in Aluminum pipe about 16In long

[Xtrempickup]

I need a piece of Aluminum piping about 16in long. i removed my old BOV on pipe and now have a rubber pipe in that id like to have a metal piece back in place of it. anybody? doesnt need to be pretty, just be 2.5in diameter and about 16in, could be longer. places around here charge 30$ for pipe and i know some of you have scrap pieces around you would never use, could even be a welded piece out of shorter pieces, i just need it.

[BadAssPerformance]

www.atpturbo.com

[Xtrempickup]

anybody who has a piece once again, no suggestions where to buy, just ppl who have anything lying around, i dont have 2 weeks to wait and 30$ to spend on pipe

[Turbo3Iroc]

Try calling a local tuner shop that does custom work if you are in a pinch.

Racing Solutions in the vendor area is pretty reasonable if you can wait for it to be shipped from Oregon.

[Xtrempickup]

the shipping + cost and time is a killer and the tuner shops all charge at least 30$ for anything and then i have cut it to size and flare it if i can and beleive me, tuners must not mind spending 400$ for intercooler piping on their hondas. I just need a piece of scrap pipe, thats all.

[Xtrempickup]

got one from a member, thanks