SebringLX
04-09-2008, 10:40 AM
I'm trying to use the Greddy e-Manage to tune my turbo Sebring Sedan. I chose it since a lot of the SRT-4 crowd use it and it works out well for them, and my engine is more SRT-4 than anything at this point.
I'm having a few issues. I wasn't the one who originally wired it into the car. The shop I had installing the turbo did it for me. It looks like they did not connect the TPS wire correctly. I get no TPS reading at all. Seems like I kind of need that to tune with the airflow adjustment map... or is there another way I can tune it without having a TPS signal to the e-Manage?
I had made some adjustments to the airflow adjustment map before realizing the e-Manage wasn't getting a TPS signal. I think this is what caused me to run really lean on the way to work.
I'm having another issue as well... I have the Profec E-01 as an electronic boost controller. I unplug it's USB port from the e-Manage to plug my laptop into it and use the e-Manage support tool software to make changes, but then when I plug the Profec E-01 back in... they stop wanting to play together. E-01 display shows a flashing ERR up at the top, and now the boost gauge isn't working on it. :confused2:
Hoping someone here can help... trying to avoid a flame fest over on the SRTForums.
I'm having a few issues. I wasn't the one who originally wired it into the car. The shop I had installing the turbo did it for me. It looks like they did not connect the TPS wire correctly. I get no TPS reading at all. Seems like I kind of need that to tune with the airflow adjustment map... or is there another way I can tune it without having a TPS signal to the e-Manage?
I had made some adjustments to the airflow adjustment map before realizing the e-Manage wasn't getting a TPS signal. I think this is what caused me to run really lean on the way to work.
I'm having another issue as well... I have the Profec E-01 as an electronic boost controller. I unplug it's USB port from the e-Manage to plug my laptop into it and use the e-Manage support tool software to make changes, but then when I plug the Profec E-01 back in... they stop wanting to play together. E-01 display shows a flashing ERR up at the top, and now the boost gauge isn't working on it. :confused2:
Hoping someone here can help... trying to avoid a flame fest over on the SRTForums.