88-89 omni/caravan bulkheads/pins

[W.P._Turbocars]

Needing to replace a couple broken pins on the engine side caravan harness. Should be the same as an omni. Willing to buy both halves of the bulkheads if the price is right and they have a few inches of lead on the plugs. Gonna wire my N20 and 2 stage BC through the factory plug along with some other goodies.

[turbovanman²]

I have a complete engine harness for $50, and if you really need the inner harness/connector, I'd say another $50 as its going to take an hour or more to get it out.

[W.P._Turbocars]

Just wanting the pair of bulkheads with a little wire hanging off from both sides or if someone has some extra pins (Both male and female) with a little wire on them. Don't need a whole harness. There doesn't seem to be anything left down here in my area at all. Can you still buy the bulkhead pins somewhere?

[turbovanman²]

Just wanting the pair of bulkheads with a little wire hanging off from both sides or if someone has some extra pins (Both male and female) with a little wire on them. Don't need a whole harness. There doesn't seem to be anything left down here in my area at all. Can you still buy the bulkhead pins somewhere?

Thats all I have, :(

Not sure if you can buy the pins, haven't really looked.

[W.P._Turbocars]

bump it up

[omnigoestohell]

bump it up

Bump, and ditto, I'd love to hear if anybody has found a source for the L-body bulkhead pins..

[looneytuner]

Try Terminal supply co. They have about 8 locations in US. Catalog is downloadable.

[W.P._Turbocars]

^^^ Thanks looneytuner

[glht_omni]

if that doesnt work for you i can cut you some wires and pins from both sides out of a non turbo caravan. that should work for what your doing right?

[W.P._Turbocars]

That would work just fine. How much?

[glht_omni]

$10 shipped i'll send you my paypal address.